ok, i have a pm3 ecu running a b16. at one point i had a p28 auto ecu that i converted to manual and took out the 115 mph governor in my old 92. i dont remember where i found the info to do that but i need to get this done so i can run past 115 on the road course here. anyone have any info. ive been to pgmfi.org and cant find the info there. someone help me please!!

 

at least i think thats the right ecu code. its the factory jdm b16a obd0 ecu, so if im wrong correct me.

 

PR3 is what you're looking for, if you need some bins, PM me.

 

ok, noob question i guess, but whats a bin?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by a1320honda &raquo;</TD></TR><TR><TD CLASS="quote">ok, noob question i guess, but whats a bin?</TD></TR></TABLE>

Nah, not really a noob question, when people chip their ecus, the program that is burned to the eprom is stored in a .bin file... The JDM ECUs have a speed limiter at 112 MPH, but is easily removed with a modified program.

 

so i have to rechip or burn a chip for the ecu, on my p28 it was a matter of desoldering a resistor on the board in the ecu.

 

de-solder a 28 pin eprom and replace it with a socket (easy to swap chips), burn a new program to a new eprom and put it in... you can normally gain 4-5 HP from a good program on a stock motor.

 

ttt