well i finished my motor awhile back and im already looking for more power.
I was thinking about a nitrous system.just a small shot like a 50 wet shot.
the set up"
b16a
ctr slugs
p-p head
ss valves
rev valve springs
stock cams
p28 with crunk2 program
b-m fpr with gauge
plx m-300 wide band
Now remember im new to nitrous so my question is what will i be ok spraying with the chipped ecu and retarding the dizzy?And is there any thing else i would have to do to be safe?Or should i forget the nos and look for power else where?

 

 

you could spray a 50 shot on any motor safely. i know of people who have sprayed 125 shot on a stock block. (not daily of coarse) just watch your wideband.

 

thanks for the reply you guys think that the ecu will be ok as long as i retard the dizzy?

 

the ecu should be fine. if you are running a 50 shot you wont even have to retard your timing. get some colder spark plugs, ngk bkr7e. check them after you make a run.