.


Modified by black cx at 6:51 PM 11/23/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black cx &raquo;</TD></TR><TR><TD CLASS="quote">Anyone using a Toda Header on their R motor? Im thinking of getting one for my jdm R motor. How are the gains compared to the jdm 4-1?</TD></TR></TABLE>

like night and day...

toda=

 

You will have no complaints with the Toda header.....very very nice choice IMO and for much less then Hytech, SMSP etc..

 

How does it compare to other brands such as hytech, dtr, an-r?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by {Powered by R} &raquo;</TD></TR><TR><TD CLASS="quote">

like night and day...

toda= </TD></TR></TABLE>

Agreed, plus clearance equals peace of mind

 

speaking of which, where can i find a toda header for best price possible from a reliable seller..brand new that is.

Thanks

Toda kicks ***.

 

The toda header has a 2.5" collector right??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blkitr &raquo;</TD></TR><TR><TD CLASS="quote">The toda header has a 2.5" collector right?? </TD></TR></TABLE>

yes

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black cx &raquo;</TD></TR><TR><TD CLASS="quote">How does it compare to other brands such as hytech, dtr, an-r?</TD></TR></TABLE>

umm so while were on subject of comparing...how does it compare to other brands? im asking in particular compared to mugen, or spoon etc.

 

it is comparable to Hytech, SMSP, or other Custome Made headers, mugen and Spoon honestly do not come close to overall power gains as Toda header. Im not saying mugen or spoon headers are no good, but overall power performance the Toda is the best OTS(OFF THE SHELF) header anyone can purchase.. oh why did I sell my toda header, well I sold it because I am not looking for Every single HP out of my motor,
but it totally out did my JDM 4-1 DC header when I dynoed them the same day,

and this is with a B16B(Toda Spec C), stock bottom end..68mm tb,2.5inch exhaust...(stock itr intake)

JDM 4-1 made 178whp, toda made 189whp

 

.


Modified by black cx at 6:52 PM 11/23/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black cx &raquo;</TD></TR><TR><TD CLASS="quote">Anyone using a Toda Header on their R motor? Im thinking of getting one for my jdm R motor. How are the gains compared to the jdm 4-1?</TD></TR></TABLE>

It depends on your application. N/A it will be great. FI, it will not do so well.

 

Best header I ever put on my car and I had a few.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeRlove &raquo;</TD></TR><TR><TD CLASS="quote">speaking of which, where can i find a toda header for best price possible from a reliable seller..brand new that is.

Thanks

Toda kicks ***.</TD></TR></TABLE>

Interested as well, Any one???

 

Good gains
Good Clearance

 

Oh, its there in Mike m sig .....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black cx &raquo;</TD></TR><TR><TD CLASS="quote">i will be dynoing my hatch with a stock 98 type r in my hatch running everything stock, including cats and stock peashooter exhaust to stock type r air box...

then i will be dynoing with toda header, omni power testpipe, and bc spec 2 exhaust</TD></TR></TABLE>

i can already say that this is one LOUD setup!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeRlove &raquo;</TD></TR><TR><TD CLASS="quote">speaking of which, where can i find a toda header for best price possible from a reliable seller..brand new that is.

Thanks

Toda kicks ***.</TD></TR></TABLE>

Good luck finding one. You wont find a new one for less than $980. I was told they were on backorder from Toda due to the steel shortage in Japan. I called all of the authorized retailers on Toda's website and only found one that had it in stock (jhpusa.com). It was the last one they had and I bought it. Go to http://www.ipsracing.com/ or call 866-477-7264. They didn't have any in stock but they said they can try to locate one.

 

butt dyno.... it gave the car more mid/low end top end is about the same.
overall i say get it. its worthed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blkitr &raquo;</TD></TR><TR><TD CLASS="quote">The toda header has a 2.5" collector right?? </TD></TR></TABLE>

Nope..... No JDM header is 2.5". They're all 2.38".

Here's a pic of the inner diameter of my Toda header:
http://kvien.no/integra/html/m...1.jpg

Here's a bunch of pics of the header:
http://kvien.no/integra/html/m...x.htm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dwnthehatch &raquo;</TD></TR><TR><TD CLASS="quote">You wont find a new one for less than $980. </TD></TR></TABLE>

yeah... that sounds about right.

pen: rockin' the t0da too, 'n lovin' it

 

i just bought a pretty brand new condition one for $850 with less then 500 miles on it
Should be coming friday.

Will the header bolt up to the Omni power 2.5 testpipe or will it need modification?

 

Good deal. The omni test pipe will bolt right up to your header.

 

How does it compare to the Jasma header?

<U>Your search for toda header returned 210 results.</U>

 

Just an FYI for anyone still looking for one, the Toda Header will be back in stock Late July - Early August. Best bet to get one is to preorder