Can anyone tell me a way to tell the difference in a rear mount bracket from a 99-00 SI and from a 94-01 Integra? Any markings or measurements or anything? I'm trying to do a swap and my rear mount bracket just seems about an inch too short and I'm worried that the guy I bought my motor off of sent me the wrong bracket. Any help is appreciated.

 

anyone?

 

If you have a 96 - 00 Ek civic the Integra Rear L Bracket will not bolt in you need a special bracket like the one that came off the 99 si, I've seen em on ebay for a reasonable price like 80 bucks

 

its going into an EG so I need the 94-01 Integra bracket. I talked to the guy that I bought the mounts from and he said these came right off of his swap in his EG so they are the right ones. I was just hoping someone knew of some identifying marks that I could look for on the bracket or something.

 

anyone? The guy swears that this mount is correct but its not measuring up compared to the other mounts that I have. If anyone has a b series integra bracket laying around and a d series and could measure them for me, PLEASE PM me or hit up me on AIM at HatchdACx. I need to get this resolved asap.

 

may just need to push ur motor back a bit and then see if the hole will line up

 

thought about that but its 1" off.

I have a b series bracket here that measures 7.5" from the mount bolt to the bolt in the top of the tranny. My d series mount and my buddies LS mount both measure 8.5".