I have a alpine iva-d300 and would like to bypass my e-brake so that the video would display while driving. I received a small black box which consists of 5 wires but no diagram. Here are the colors: Red, Yellow, Orange, Blue, and Black. I think its safe to say the Black is ground and Red is acc and the yellow is possibly battery?

 

Anyone?

 

IM sent. 94

 

Thanks for the little trick. Im gonna try it tomorrow and see whats up. By using the 1st click on the e-brake, it would allow the tv to work but would the brake light turn on? And being that my car is a 5spd can I ignore the front brake wire? Not to sure yet...

 

yes the brake light will come on, and no you can not ignore the FOOT brake wire. 94

 

http://i17.photobucket.com/alb...1.jpg

http://i17.photobucket.com/alb...2.jpg

http://i17.photobucket.com/alb...3.jpg

1. from the main harness, I just noticed the parking brake wire (yellow/blue) is connected to the orange wire on the black box

2. From the main harness, the foot brake wire (yellow/black) is connected to the yellow wire on the black box.

3. From the main harness, the ground wire (black) is spliced with the black wire on the black box and also has a 3rd wire dangleing.

4. From the main harness, the ignition wire (red) is spliced with the red wire from the black box and also has a 3rd wire dangleing.

5. From the main harness, the remote turn-on wire (blue/white) is spliced with the blue wire from the black box. I dont have the remote so I am assuming I can disreguard?

I would like to install this black box sinse half the job is dont kinda...