I have a set of Supposed " type R" camshafts. they are supposed to be 95 Itr camshafts. My camshafts has 3 portruding rings and 1 engraved ring on the intake side and my exhaust has 3 portruding rings and 1 engraved ring as well. So they kinda look like 92-93 cams but with the engraved ring. Lemme know if there are any stock cams that match the description.

 

USDM ITR 1997-2001
JDM ITR 1996-2001


you have 1995 ITR cams?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itralex &raquo;</TD></TR><TR><TD CLASS="quote">USDM ITR 1997-2001
JDM ITR 1996-2001


you have 1995 ITR cams?</TD></TR></TABLE>

I thought ITR's were produced in 1995 with the 4X114.3 wheel bolt pattern?

 

that was 96.
unless you mean "actually" made which would be 95, but model year is 96...

 

https://honda-tech.com/zerothread?id=1191018

scroll down a little bit

 

 

i've seen that picture 3 times too many. As you read my description of my cam and compare that to what you see in those pics, they are nothing alike. Someone with knowledge please post

 

When you degree them in, on the VTEC lobe , see if the lift and duration are correct for "R" cams.

 

It's pretty simple. Anybody got a ITR Helms manual? It will tell you what the measurement is from the nose to of the lobe to the heel (opposite side of the nose).

Put a $25 caliper on it and you basically done.

 

from your description, they sound just like my 95 GSR cams

 

In Japan 96spec Type R débuted in Aug 1995

 

Something like this?

http://www.ff-squad.com/tech/c...1.jpg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snowseeker &raquo;</TD></TR><TR><TD CLASS="quote">Something like this?

http://www.ff-squad.com/tech/c...1.jpg</TD></TR></TABLE>

that picture is totally wrong, it has been pretty much proven those cams are the 94-up GSR cams, mine were like that as were multiple of my friends

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 &raquo;</TD></TR><TR><TD CLASS="quote">

that picture is totally wrong, it has been pretty much proven those cams are the 94-up GSR cams, mine were like that as were multiple of my friends </TD></TR></TABLE>

http://www.ff-squad.com/tech/cams/94gsrint_1.jpg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 &raquo;</TD></TR><TR><TD CLASS="quote">

that picture is totally wrong, it has been pretty much proven those cams are the 94-up GSR cams, mine were like that as were multiple of my friends </TD></TR></TABLE>

B17 cams, from what I have learned, are identical to 94+ GSR cams. At least in terms of specs.

 

my GSR cams look nothing like that other picture. you dont have to believe everything on the internet. like i said i have actually taken mine to see what they look like, and alot of my friends with GSR swaps have identical cams

 

I have seen just about all the b series cams there is. The ffsquad cam pics are were always right on the money for me. The rings can look the same from one cam to another sometimes.

 

Im not trying to sound like a smart *** since these nice help have tried to help you why dont you post a pic of the cams you have so we can see what you are talking about.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 &raquo;</TD></TR><TR><TD CLASS="quote">

that picture is totally wrong, it has been pretty much proven those cams are the 94-up GSR cams, mine were like that as were multiple of my friends </TD></TR></TABLE>
you are right, but dont waste your time arguing here. i tried stating those are 94-00 gsr before, but people just believe what they see.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snowseeker &raquo;</TD></TR><TR><TD CLASS="quote">

http://www.ff-squad.com/tech/cams/94gsrint_1.jpg</TD></TR></TABLE>

those are not 94-01 gsr cams for sure. 94-01 gsr cams have 3 rings

 

yeah i do have pics but they are on my nextel and i dont have a way to load them into my computer and i dont have a digi cam. If someone could email me there nextel number i send the pic and they could load it up onto the net. Thanks for the help guys but still havent figured it out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cripsaks808 &raquo;</TD></TR><TR><TD CLASS="quote">yeah i do have pics but they are on my nextel and i dont have a way to load them into my computer and i dont have a digi cam. If someone could email me there nextel number i send the pic and they could load it up onto the net. Thanks for the help guys but still havent figured it out</TD></TR></TABLE>


quite being freaking lazy and buy a caliper or go to your local acura dealership. When i was concerned about recieving fake R cams, i went to the dealership, had a mechanic check the specs of the vtec integra cams (all specs were on the same page i believe) and in a matter of 5 minutes i had my answer. Not a single person can help you here with the description you've provided, and many people in this thread have tried. Suck it up and go find out for yourself

PS. my "r" cams turned out to be gsr cams, resulting in a major ebay hassle ending with me getting some minty brand new skunk2 cams.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jamessh1 &raquo;</TD></TR><TR><TD CLASS="quote">


PS. my "r" cams turned out to be gsr cams, resulting in a major ebay hassle ending with me getting some minty brand new skunk2 cams.</TD></TR></TABLE>

I never got that lucky. Lost 800.00 to some ***** in florida for a stereo amp that I never got. I still have his address, going to pay him a visit next time I'm in florida.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snowseeker &raquo;</TD></TR><TR><TD CLASS="quote">

I never got that lucky. Lost 800.00 to some ***** in florida for a stereo amp that I never got. I still have his address, going to pay him a visit next time I'm in florida. </TD></TR></TABLE>

Lucky? He went from some OEM cams to a set of Junk2's.. Thats not luck!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybrid93Eg &raquo;</TD></TR><TR><TD CLASS="quote">

Lucky? He went from some OEM cams to a set of Junk2's.. Thats not luck! </TD></TR></TABLE>

I'll trade anyone my OEM b16 cams for some skunk 2's.