What is a good Flywheel weight and a good clutch for a JDM B16A SiRII with a Hydro tranny

 

Stock is fine, a nice balance of performance and drivability, especially if the engine is still mostly stock. Aftermarket parts will have a performance impact, but will also affect drivability. I use an ACT flywheel and clutch, but it is harder to start from a stop and much more difficult to drive in stop-and-go traffic. I would have kept the stock setup, but it wouldn't quite hold 400+WHP.

 

trust me stay stock until you've got some significant mods that exceed the stock units.

You don't wanna drive around on a 6 puck unless you've really got the need.