We are now offering DPFI OBD0 to OBD1 conversion harnesses.

I wanted to introduce this on the CRX/EF board first because this is a brand new product from us.

We have greatly simplified the conversion of DPFI vehicles to use an OBD1 ecu with MPFI engine.

This harness only has four extra wires than the standard MPFI OBD0 to OBD1 conversion harness.

Six pages of super easy to understand instructions/charts accompany the harness.

http://www.boomslang.us/obd0_1.pdf




See our site for pricing.



Modified by boomslang at 4:51 PM 6/7/2005

 

oh my damn that is frickin clean, good job guys now it will be even easier to do a swap.

 

Nice...now I dont know which one to get......save money and go with boomslang...or go with rywires plug and play harness...

 

Here's the instructions....

http://www.boomslang.us/obd0_1.pdf

 

awesome.

 

thats perfict. i was just about to get the old one b4 i saw this one.

plz pm me with fine details :D

 

Can anyone vouche for boomslang OBD0-OBD1 harnesses? I've read about problems only with his OBD0-OBD1 harness.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF Two &raquo;</TD></TR><TR><TD CLASS="quote">Can anyone vouche for boomslang OBD0-OBD1 harnesses? I've read about problems only with his OBD0-OBD1 harness. </TD></TR></TABLE>

Try asking a one of the many reputable shops like King Motorsports or Intec Racing, if our harnesses are outstanding. They use our harnesses like a fat guy uses butter on popcorn.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boomslang &raquo;</TD></TR><TR><TD CLASS="quote">Try asking a one of the many reputable shops like King Motorsports or Intec Racing, if our harnesses are outstanding. They use our harnesses like a fat guy uses butter on popcorn. </TD></TR></TABLE>

Or like a Fat kid likes cake, HAHAHAHAHAHAHAHAHA
Sounds good, **Adds on to the Project list**

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boomslang &raquo;</TD></TR><TR><TD CLASS="quote">I wanted to introduce this on the CRX/EF board first because this is a brand new product that no one else manufactures.[/QUOTE[QUOTE=EF Two]Nice...now I dont know which one to get......save money and go with boomslang...or go with rywires plug and play harness... </TD></TR></TABLE>

Let me clearify some things. I (JKOBD) have been building the DPFI Pre-OBD (OBD0) to OBD1 MPFI conversion harness for atleast 4 years. Customers request it all the time and I have been making them with ease.

The difference in the DPFI Pre-OBD (OBD0) to OBD1 MPFI conversion harness and the Rywire.com plug and play harness is that you are still required to add on the additional injector plugs, change the distributor plugs, add the 4 wire O2 sensor plug, vtec plugs, etc. The RYwire.com plug and play harness comes as a complete plug and play unit with no extra sensor connectors to be ran, etc.

Jason
http://www.JKobd.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">
Let me clearify some things. I (JKOBD) have been building the DPFI Pre-OBD (OBD0) to OBD1 MPFI conversion harness for atleast 4 years. Customers request it all the time and I have been making them with ease
</TD></TR></TABLE>

Al Gore invented the internet too.

 

I was floored when I read this, because I just ordered the normal one on the 3rd...then I noticed the $35 difference. Not bad for those who want **** done asap, but not worth it to those on a shoestring budget like I am now.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boomslang &raquo;</TD></TR><TR><TD CLASS="quote">

Al Gore invented the internet too.

</TD></TR></TABLE>

hey guys, I dont think bad mouthing companys is good karma. You know it will **** you in the end. I really think the mods should come take care of this. no offense to any of you guys.

Hey JKOBD. where in lake worth Are you? Im doing my d15b vtec swap, VERY soon. and I may need your help if I decide to get your harness(probly will)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pogiTSI &raquo;</TD></TR><TR><TD CLASS="quote">

hey guys, I dont think bad mouthing companys is good karma</TD></TR></TABLE>

There's no bad mouthing going on. It's playful banter.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boomslang &raquo;</TD></TR><TR><TD CLASS="quote">There's no bad mouthing going on. It's playful banter. </TD></TR></TABLE>

OHHHHHHHHHHHHHHHHHHHHHHH ok, hahahaha, banter.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boomslang &raquo;</TD></TR><TR><TD CLASS="quote">Al Gore invented the internet. </TD></TR></TABLE>

Are you trying to say that Blown90hatch was saying something untruthful?
He (JKOBD) was just stating what you did not tell the end user in your post. What really must be done.
Misinformation is bad enough on honda-tech, as the experts we need to make sure we're clear in what the end user really needs.
We don't want people thinking this is all they need to convert to MPFI, that would be a lie.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pogiTSI &raquo;</TD></TR><TR><TD CLASS="quote">

hey guys, I dont think bad mouthing companys is good karma. You know it will **** you in the end. I really think the mods should come take care of this. no offense to any of you guys.

Hey JKOBD. where in lake worth Are you? Im doing my d15b vtec swap, VERY soon. and I may need your help if I decide to get your harness(probly will)</TD></TR></TABLE>
WTF he didn't start it...***

I have used both the jk and the boomslang, the boomslang was he only that that I didn't have to fix. And the Rywire.com one.....lol....no additional wiring needed my ***....they need to rename it RE-WIRE cause that is all you will do to get it running, your better off doing an mpfi swap on your own then getting a obd-0 to obd-1 conversion harness.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NikoZai &raquo;</TD></TR><TR><TD CLASS="quote">
He (JKOBD) was just stating what you did not tell the end user in your post. What really must be done.
Misinformation is bad enough on honda-tech, as the experts we need to make sure we're clear in what the end user really needs.
We don't want people thinking this is all they need to convert to MPFI, that would be a lie.
</TD></TR></TABLE>

Believe me, we aren't in the business to dupe people into sales. The instructions fully state what you need for the conversion. It is very straightforward. Please take time to read them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DohcVtecCrx &raquo;</TD></TR><TR><TD CLASS="quote">WTF he didn't start it...***

I have used both the jk and the boomslang, the boomslang was he only that that I didn't have to fix. And the Rywire.com one.....lol....no additional wiring needed my ***....they need to rename it RE-WIRE cause that is all you will do to get it running, your better off doing an mpfi swap on your own then getting a obd-0 to obd-1 conversion harness. </TD></TR></TABLE>

Hey, **** you.

 

Serious man..... F-in lame!!!


This thread is goin to the gutter anyway....

 

 

then in b4 the lock

 

Its sad to see the way this thread turned out. I hoped it would actually have some good technical info/discussion.