I'm selling my hatch again so I can buy merchandise for my tire shop. Anyway this is what I have.

93 DX hatch painted Spanky Green
interior removed then painted black with POR 15.
Sony 7" screen with Fahrenheit MP3/DVD/DVR player.
Polk front 6 1/2's
one 12" rockford fosgate sub in the rear.
All speakers powered by a Coustic amp.
Delsol seats with Black stripe.
Swede black dash.
DX cluster with integrated A/F guage.
Sunpro 3 3/8 back-lite tack.
SPAL power windows(works perfect)
LED back-lite cluster.

Motor....

96 H22 head
97 F22b1 block
K26 KKK turbo
starion intercooler
running 7lbs
M2a4 JDM trans
2 1/2" Kteller SS exhaust W/ 18" resonator and Magnaflow muffler.
Fidanza 8.5lb flywheel
H22 HCP mounts
engine has been raised 2" in the bay for better ground clearance.
ITR AEM CIA
P28 W/ socketed ZIF with programmable chip and Nokia cable USB ready for datalogging(currently running crome)
Full Race traction bars with ES suspension bushings, new upper A-arms with new ball join.
PLX m-300 wideband

suspension consist of KYB AGX's and GC coils 400f/300r.

car now rides on 14" HX wheels with gold center and polished lip.

the exterior has the usual parking lot dent and **** but overall its in good shape.

here are a few older pics. I don't have any pics with the new wheels.











asking 5000

Motor is still in it tuning stages but has had a few runs down the 1/4 mile and was able to do a 13.3@106.8 mph untuned and on street tires.

please call 973-262-5060 my name is Josh

Modified by fastwanabe at 7:25 PM 8/12/2005


Modified by fastwanabe at 6:18 AM 11/17/2005


Modified by fastwanabe at 6:19 AM 11/17/2005


Modified by fastwanabe at 6:20 AM 11/17/2005


Modified by fastwanabe at 6:23 AM 11/17/2005

 

7500 is a little too high man....nice hatch though , but 7500 is a lot, and this is the wrong forum, try posting it here https://honda-tech.com/zeroforum?id=42

--Henry

 

F23a block with h22a running some RSX pistons? Please do exlpain the RSX piston part

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93b16hatch &raquo;</TD></TR><TR><TD CLASS="quote">F23a block with h22a running some RSX pistons? Please do exlpain the RSX piston part </TD></TR></TABLE>

RSX pistons have the same bore as an F23(86mm)... The same compression height, and the same wrist pin design...

 

uppity

 

uppity

 

up for the night crew

 

uno dos tres cuatro