what tools are needed to install a camber it onto my R?

 

What camber kit? Front or rear? Details.

 

mainly front. i think rear is just unbolt and bolt in right? thanks

 

front is the same.. Just more bolts heh

tj

 

lol thanks, i just wanted to make sure we didn't need anything special.

 

little off the topic but lets say I want to lower the R does it need a camber kit or can I just leave it alone

 

i think it is advised to get a camber kit if you lower a honda. i heard its not neccessary and should only be used for changing the camber for road racing or something. well i want get them coz i dont want to run down tires every 2 months or soo

 

You do need some special tool to pop the ball joint out. I used a small gear puller to do that.

 

Toe is what eats your tires away like crazy.

 

[QUOTEYou do need some special tool to pop the ball joint out. I used a small gear puller to do that.[/QUOTE]

what ball joint? a picture would help

 

Sorry I don't have a pic. But that's the joint where the upper A-arm connected to the steering knuckle with a pin and a pin nut.

 

the negative camber is that bad with the spoon springs, typeR599?

 

Now that someone came up with the topic. I have another question:

On a teg R, how much you can lower it before you need to install a camber correction kit?

For 1.5" to 2.0" lowering, do you need the kit?

 

naw i dont think it's that bad, but i can still see that i have a camber problem. i just want to get rid of it so i dont wear down my tyres.

 

type R 599:
I run down tires evry 4 months and they wear outside It depends how you drive.