SAFC-II post your fuel curve settings with your mods
Thread Starter
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
SAFC-II post your fuel curve settings with your mods
just installed one. i know its not the ultimate tuning tool, but i know there are other guys out there with them and i wanted to get a good starting point until i can get my hands on a wideband.
right now my LO throttle setting is just the default 0% correction factor but my HI setting is -1% until about 2200rpm then 0% until about the vtec point at 4800rpm at which point i richened the mixture to about 7% to a 7800rpm redline.
am i retarded? shouldi have done something else? dont be bashful, let me know.
right now my LO throttle setting is just the default 0% correction factor but my HI setting is -1% until about 2200rpm then 0% until about the vtec point at 4800rpm at which point i richened the mixture to about 7% to a 7800rpm redline.
am i retarded? shouldi have done something else? dont be bashful, let me know.
anyone?
Banned
Joined: Feb 2004
Posts: 7,252
Likes: 1
From: Canada
Re: SAFC-II post your fuel curve settings with your mods (JDM_Ej)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_Ej »</TD></TR><TR><TD CLASS="quote">You really shouldnt adjust that unless your on a dyno. 
</TD></TR></TABLE>
</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
