this is an obd2 motor converted to obd1. i jumped the blue clip to see what the cel was all about, and it only blinks once, a short blink. i thought that it had to blink a long blink before i short one, seeing that code 1 is on long blink. anyone have ideas on this? btw the car runs fine

 

i was always under the impression that one long blink means 10 and each short one means 1

 

One short blink is code 1, which is the primary o2 sensor.

One long blink would be code 10.

 

yea- ok guys i got it straighted out now. i think i had my head in my *** when i made this post

thanks for helping me get it cleared up

 

I thought the quick blinks were 10, and each long blink was 1.

 

Nope 1 short blink is for 1. and one long blink is 10. read the ECU code thread

https://honda-tech.com/zerothread?id=1171263

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMlyfestyle &raquo;</TD></TR><TR><TD CLASS="quote">Nope 1 short blink is for 1. and one long blink is 10. read the ECU code thread

https://honda-tech.com/zerothread?id=1171263
</TD></TR></TABLE>
nevermind...I am an idiot. Disreguard my earlier post and carry on lol.

 

ok well then i guess this doesnt make sense to me...


if i have my o2 sensor disabled through the uberdata settings, how can i still throw a code for it??

i was throwing a o2 heater code a while ago, but i disabled that and i havent had the code since

 

Maybe you forgot to add it to the rom.