Have anyone done this? What parts are needed? All I know is to use the p54 Del Sol bracket with the SOHC A/C compressor. From what car does the pulley/tensioner come from? The pulley/tensioner on the SOHC A/C compressor is different from the Del Sol one so it wouldn't bolt up.

 

dang i need help!

 

bump

 

You can use the tensioner for the P54(delsol vtec) bracket, a tensioner from a P7J(crv) bracket, or a (P72)GSR tensioner. All work the same.

 

any of the tensioners from those car will work?

 

the a/c lines from an EX/SI will so will condensor and drier, the brackets off of a SI or delsol VTEC are the ones to use.

 

I already have a delsol p54 bracket

 

the wheel for del sol vtec and the y8 (not sure about other sohc) are the same part #
Im still waiting for someone to answer my question on the pivot arm compatibility

 

bump

 

ISe the pivot arm from a gsr, delsol vtec, or crv. All three will work.