i have a 90 crx with the d15b2 in it and i want the minime swap. what do i need to do and were can i get really detailed instructions to do it. i want to run the z6 head and make it high compression. so what do i need to do this, as far as parts, wiring, and i want to know about some one telling me to unplug some oil plug on the block for the vtec how do i do this. i want to put the z6 intake and exhaust mani on it. i hear alot about the dist. and do i need to swap the ecu as well or can i convert the stock b2 ecu. thanks guys

 

It's called the oil jet, it's on the center middle top of the block with the head off of it. You need to take it out so vtec will activate when you rig it up.

 

http://crx.honda-perf.org/arti....html

 

If you need a plug and play harness, http://www.rywire.com is the place