picked it up this weekend, runs nice after a new main relay. if i decide not to do the project, car may be for sale soon. it's got potential, what you think?

 

build it

 

my plan was to take my swap, suspension, etc from my crx si and change over from the crx to the civic. but in the last couple days a few things have changed and i don't know the fate of either car right now so its on hold.

 

hatches are slightly lighter. But the rex is sleeker. However, I won't deny enjoying a back seat and large cargo area with the seats down.

 

um, im having issues with taking my back seat out since its no use to me.. i took out the seat cussions, but the back cushions of the seat are there, what all do u gota unbolt to get that **** out of there?

 

u got like the exact same hatch as me, only different color and u got better interior. dont ya jsut love that 4 speed ****? lol id just build it up man, hondas rule. good luck with w/e u decide

do u not have exhaust on there? cause i dont see it

 

His exhaust is probably rusted off. I've seen that frequent with these cars.

Back seats: To remove the rear seats, there is a "C-lock" on the outside bottom of the seat. It's black. Pull that out with a pair of pliers and then push your rear seat to the outside and lift out. Piece of cake.

 

BTW, I had a 4spd stick too...got rid of that crap. I love my new 5spd. EASY swap...and cheap.

 

lol, ya ill have it until i get a b16a.. but um... this is what ive done to my backseat

i took the black **** off the back of the back seat, i unbolted like 4 bolts under the seat, and pulled the bottom of the seat out of the car, i just have the back part of it. um.. thers a like a black thing on back of each sea that connects to it with a rod or something... is that what ur talking about?

um.. why the hell are there wires coming out like almost at the rear bumper coming from under the fender and go back in through a tiny whole on both sides of my car???


Modified by Bjorn20 at 1:30 PM 5/4/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JokerTypeR &raquo;</TD></TR><TR><TD CLASS="quote">His exhaust is probably rusted off. I've seen that frequent with these cars.

</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bjorn20 &raquo;</TD></TR><TR><TD CLASS="quote">u got like the exact same hatch as me, only different color and u got better interior. dont ya jsut love that 4 speed ****? lol id just build it up man, hondas rule. good luck with w/e u decide

do u not have exhaust on there? cause i dont see it</TD></TR></TABLE>

yeah, exhaust is rusted off. actually it is a five speed. and nice thread jack on the back seats

 

um.. why the hell are there wires coming out like almost at the rear bumper coming from under the fender and go back in through a tiny whole on both sides of my car???
?????????????

ok nvm, the black thing that i saw isnt even connected to the back rear seat. its connected into the side of my car through a metal rod or something, do i gotta take off the back panels to get to that?


Modified by Bjorn20 at 2:18 PM 5/4/2005

 

do it!

 

Not bad

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brownjd &raquo;</TD></TR><TR><TD CLASS="quote">
and nice thread jack on the back seats </TD></TR></TABLE>

Tee-hee. Sorry. I just know that when I ask questions on HT I want immediate answers no matter where they come from...

Yes, in the back seats. I don't know why you pulled 4 bolts from the bottom. I think there's like two in the center on the backside (under the backrests) and then you pull up and out of the slots on the front side.

As for the backrests, there's two sides to each half. The inside (the middle of the car) and the outside (the part closest to the wall) On the outside down by the bar that holds the seat in there is a black c-spacer-clip thingy. Just pull it out. Once pulled out, slide the half-seat in that direction and pull out. Repeat for the other side. No panels have to be removed, but you WILL have to pull the hatch-area carpet off of the back side of the seats.

All the wires you see go to: Fuel pump, fuel line, gas-door release cable, hatch-release cable, back up lights, license plate lights, tail lights, brake lights, reverse lights, hazzard lights, turn-signal lights, and open-hatch sensor. Which wire were you talking about