hey i was wondering if it was at all possible to change the rod/stroke ratio in say... an h22a.

i was thinkin about it and maybe i could just swap out longer rods from a diff honda engine.

im prolly way off so just lemmme know thanks

oh and i was looking for a h22a>ef swap guide and couldnt find one could anyone point me in the right direction

 

i don't know rod lengts off the top of my head, but i do know that if you put in longer rods, you either need to destroke the crank or get pistons with a smaller height from the wrist pin to the top of the piston.

 

You can actually increase the r/s ratio in any engine.

Read this: https://honda-tech.com/zerothread?id=714519

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jake1511 &raquo;</TD></TR><TR><TD CLASS="quote">oh and i was looking for a h22a&gt;ef swap guide and couldnt find one could anyone point me in the right direction</TD></TR></TABLE>

this is the closest your going to get to a swap guide for an h22 ef.

2point2's h22ef
https://honda-tech.com/zerothread?id=711900