Modified by sheepey at 7:15 PM 6/6/2005

 

The specs look to be from Web?

Looks fine to me, Id like to have a little more compression with a cam like that though... 11.7 seems a little low

 

Modified by sheepey at 10:24 PM 6/2/2005

 

anyone else?

 

i ran this setup years ago, the skunk 2 stg 2's are perfect for it... just my experience, made good power all the way through the powerband.... good luck on your setup. take it easy. mike

 

I have that exact same set of webs... I like. Tuned with VAFC

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Zero4Racing &raquo;</TD></TR><TR><TD CLASS="quote">i ran this setup years ago, the skunk 2 stg 2's are perfect for it... just my experience, made good power all the way through the powerband.... good luck on your setup. take it easy. mike</TD></TR></TABLE>

If you dont mind me askin, how much power u make? Thanks if all the info<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTEC 91 Civic &raquo;</TD></TR><TR><TD CLASS="quote">I have that exact same set of webs... I like. Tuned with VAFC

</TD></TR></TABLE>

whast ur setup?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sheepey &raquo;</TD></TR><TR><TD CLASS="quote">If you dont mind me askin, how much power u make? Thanks if all the info

whast ur setup?</TD></TR></TABLE>
LSVTEC 12.3:1 comp, Ported '00 si head, Crower valvetrain, Webcams, ITR header, ITR IM... I'd make 200whp easily just by tuning.

 

we made 220 on a dynojet on 91 octane fuel. we built it to be a safe street car motor. 11.5 arias pistons...you can easily make 200 on a 1.8 on 91 without even going 2 liter. keep me posted on your build.

 

I had similar setup in my all motor teg

gsr head portflow
skunk manifold
68 mm throttle body
84.5 b20 ( not sleeved)
endyn 84.5 11.5 comp pistons
eagle rods
skunk 2 cams
hondata

made around 218hp 152/bs on 91 pump gas, it was a daily driven on

 

nice, that setup works... and is fairly simple. gotta love it.

 

alex is teh gay


Modified by SyDuck at 10:27 PM 5/9/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SyDuck &raquo;</TD></TR><TR><TD CLASS="quote">alex is teh gay


Modified by SyDuck at 10:27 PM 5/9/2005</TD></TR></TABLE>

lol you're one funny guy. Anyone else think these cams will be ok? (cause i already picked em up )

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SyDuck &raquo;</TD></TR><TR><TD CLASS="quote">alex is teh gay


Modified by SyDuck at 10:27 PM 5/9/2005</TD></TR></TABLE>
lol that made me laugh/spit at the same time

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EVOL &raquo;</TD></TR><TR><TD CLASS="quote">
lol that made me laugh/spit at the same time</TD></TR></TABLE>

wtf?? lol... you guys are mean lol. ******* lol