Im using the Zeitronix ZT-2 to datalog with. I've been experimenting so far and have found that i need to adjust the "Frames Per Second" so I can get readings i can actually understand. Ive tried it at max and its just too much info per second when i try to plot it on a graph.

It goes from Max30.3 frames/sec to a Min1.0 sec delay

Right in the middle is about 2.0 frames/sec

Any suggestions from other ZT-2 users?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by T-RO &raquo;</TD></TR><TR><TD CLASS="quote">Im using the Zeitronix ZT-2 to datalog at 30 frames/sec [b]</TD></TR></TABLE>