Need Buddy Club Spec 2 exhaust silencer
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 722
Likes: 0
From: anchorage, ak, usa
buddy club spec 2
anybody have a silencer for this application.. didnt realize how loud it would be w/out a silencer
84mm+12.5comp+JUN stage3's= LOUD AS ****
willing to pay top dollar... can someone help me out or point me in the right direction....
thnx in advace fellas
84mm+12.5comp+JUN stage3's= LOUD AS ****
willing to pay top dollar... can someone help me out or point me in the right direction....
thnx in advace fellas
Kill Gil
Joined: May 2003
Posts: 13,286
Likes: 0
From: San Diego, CA
Re: (BlueR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueR »</TD></TR><TR><TD CLASS="quote">hehe, i'm speaking from my personal experience...nothing
your wife won't stop bitching until there is a Fujitsubo Rm01a on your car
</TD></TR></TABLE>
your trippin, the silencer cuts the noise in half, but it is still real loud even with it on
your wife won't stop bitching until there is a Fujitsubo Rm01a on your car
</TD></TR></TABLE>your trippin, the silencer cuts the noise in half, but it is still real loud even with it on
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 722
Likes: 0
From: anchorage, ak, usa
Re: (BlueR)
car sounds good... but im sure local law enforcement will also agree with the wifey... we'll see how long it lasts..
wish they had the gramlights exhaust for the DC2R
car isnt too LOUD imo until it hits VTAKKKKKKK
wish they had the gramlights exhaust for the DC2R
car isnt too LOUD imo until it hits VTAKKKKKKK
Honda-Tech Member
Joined: Feb 2003
Posts: 1,100
Likes: 0
From: Los Angeles, CA, USA
Re: (B2FiNiTY)
silencer is a must!!! i had decided to install a highflow cat to replace the test pipe cuz that shiz was too loud even with the silencer. one day i even lost it and i took me a couple of hours in the night, IN THE NIGHT mind you to find the silencer. trust me the silencer is worth it. but this is just my experience
Honda-Tech Member
Joined: Oct 2004
Posts: 478
Likes: 0
From: Boston, Ma, USA
Re: (t0ekn3e)
From my experience with silencers, they quiet down the noise on the outside of the car a **** load, which is good for the sake of not getting a ticket, however, inside the car it is still loud as ****. Just my experience... 
Joined: May 2005
Posts: 11
Likes: 0
From: Milano, Italy
Re: (97Preludeguy)
hi everyone...I'm a newbie
I've bought a specII exhaust too
here it is
and this is how the "silencer" looks like...
ahahaha
the exhaust is not on my car yet
I've put the silencer into my tenzo type5 muffler,..and it seems to "work"...
but, don't think it will do a lot on the the spec 2...
I don't know...
I'm going to mount the spec II this week,...if you'd like, I could do and post some vids of it on my EG6....with and without the silencer
bye
I've bought a specII exhaust too
here it is
and this is how the "silencer" looks like...
ahahaha
the exhaust is not on my car yet
I've put the silencer into my tenzo type5 muffler,..and it seems to "work"...
but, don't think it will do a lot on the the spec 2...
I don't know...
I'm going to mount the spec II this week,...if you'd like, I could do and post some vids of it on my EG6....with and without the silencer
bye
Honda-Tech Member
Joined: Jan 2004
Posts: 2,889
Likes: 0
From: Orange County, CA
Re: (Civ79)
3.0 inch exhaust setup on a N/A application ?? hmm..
I had a jun head, prospeed header with 2.5 inch merge, catless with a big *** resonator and the buddyclub prospec on my car. and good god it sounded like an indy car merging on the freeway. had to have my stereo at half volume to hear anything.
This was on a H22, but god damn.
I had a jun head, prospeed header with 2.5 inch merge, catless with a big *** resonator and the buddyclub prospec on my car. and good god it sounded like an indy car merging on the freeway. had to have my stereo at half volume to hear anything.
This was on a H22, but god damn.
Honda-Tech Member
Joined: Nov 2000
Posts: 11,967
Likes: 0
From: Charlotte
Re: (drifter_X)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drifter_X »</TD></TR><TR><TD CLASS="quote">holyyy that must be LOUD!!! </TD></TR></TABLE>
It is.
The silencer does make a difference... not much... but some.
It is.
The silencer does make a difference... not much... but some.
Joined: May 2005
Posts: 11
Likes: 0
From: Milano, Italy
Re: (Willard)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">3.0 inch exhaust setup on a N/A application ?? hmm..</TD></TR></TABLE>
yes, TAIL SIZE is 76.3mm but the PIPE is 60.5 mm...(and both are "outer measures")
I think that in these kind of exhausts the measure that count is the pipe one...then, if the "non-silenced" tail is 3" or 5"..it shouldn't make any difference!...
I think they made it like this to give the silencer a meaning
...(the inner size of its silencer is 34 mm)
Modified by Civ79 at 11:43 AM 5/2/2005
yes, TAIL SIZE is 76.3mm but the PIPE is 60.5 mm...(and both are "outer measures")
I think that in these kind of exhausts the measure that count is the pipe one...then, if the "non-silenced" tail is 3" or 5"..it shouldn't make any difference!...
I think they made it like this to give the silencer a meaning
...(the inner size of its silencer is 34 mm)
Modified by Civ79 at 11:43 AM 5/2/2005
