Okay for those who don't know me. I was building a B16A to race in H1 in Honda Challenge. All my B series parts are for sale. I'm not quite sure about the mounts yet but I'll let you know. All prices are OBO. Most of my prices are half of what they should be so don't low ball me.

All parts are in San Diego. Pick preferred but will ship.

<U>Parts</U>
Semi-Complete Short Block ($500)
- 1 B16A short block over bored .25mm (crank, main caps, oil pump, oil pan and stock bolts included)
- .25 over PCT Pistons with rings on rods with ARP rod bolts. Used for 500 miles NEVER raced
- ARP Main Studs
- Oil Pan with Spoon Magnet bolt
- New rear seal

- Custom B16A ONLY headers. Will not fit B18's or 20's. ($200)
2.5 oulet with donut
- EG Arms with Energy bushings, Half already installed ($125)
half of the kit is in the arms (stock bushings pressed out [$45 per arm] new ones installed), not on the car. Never used.
- I have 10 ECU Chips (JUN, Mugen, Skunk2, J's and Spoon) ($11 each, shipping included)


PM if interested. Bump if you like.

Will trade some parts for D-series swap. Must be mostly complete (Motor [complete], tranny, axels, don't need ECU or wire harness).

<U>Sold Parts:</U>
- Type-R Starter with bolts ($75)
- B-series ACT Flywheel. Barely used.
- ST Corsa Cam gears w\ shoulder lock (Thanks KingOfQB)
- Greddy B16A Timing Belt, used for 300 miles Never raced, ($60)
<U>All Gone to Skank-***-Sam</U>
- B16A Head. Full race port. Milled .010. (will ship at buyers risk. I will NOT take any responibility for shipping. I will do my best at wrapping. Insurance required)
- Dual Valve springs with titanum retainers
- CompCams Stage 2
- Mugen head gasket (used for 5 minutes) Still retains all shapes and is not deformed.
- ARP Head Studs
- GSR Axels including half shaft
- B-series ClutchNet Carbon Fiber Clutch
- B-series OBD I Dizzy with MSD cap
- B-series valve cover Custom painted blue
- B-series Rad hoses
- OBD-1 B series Alternator with bracket
- JDM Gold B series shift linkage with Energy bushings
- Hondata Intake Manifold Gasket
- Type-R oil pump and housing, must go together, will fit on any b-series,
- AZ Race Machine Alum Poly Urthane Mounts with Rear L bracket

My pics y0!

ARMS





Modified by qi_doy at 5:00 PM 5/17/2005


Modified by qi_doy at 5:54 AM 5/18/2005


Modified by qi_doy at 4:16 AM 5/23/2005


Modified by qi_doy at 4:17 AM 5/23/2005

 

Before bed bump

 

Before jury duty bump

 

^^^

 

I will trade my gsr head for your b16 head.

 

interested in the clutch/flywheel.. pm me with details please (ie, condition, pics, mileage, works for ALL b-series?, etc)

 

I think the clutch and flywheel are going to be sold tonight. I will let you know tomorrow.

Sorry I don't want to trade heads. I just want to sale mine.

 

morning bump

 

Lunch Bump

 

what bushings do you have left? is that whole box included with the arms?

 

The entire kit is in the box. Nothing missing. Entire box included with the arms

 

how much for the short block shipped to 77386?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaChevy &raquo;</TD></TR><TR><TD CLASS="quote">how much for the short block shipped to 77386?</TD></TR></TABLE>

About $60 through FedEx Ground. UPS don'est accept shipment of more then 75 so it has to be fedex.

 

evening bump

 

^^^

 

pm'ed you

 

^^^

 

bump bump bump

 

bump for you

 

Thanks, PM replyed

 

Bump it

 

any pics of the head?

 

night bump

 

im interested in the head, do you have any pics? e-mail me at Lm546@aol.com

 

Sorry I have been lagging with the Head pics guys. I'll get them soon.