just wanted to let everyone here in on my last outing at sac speedway. A bunch of guys went up on this last WED and i did a best of 14.4@95mph(14.9@89mph with a D16z6 was what i beat).
60ft-2.25
1/8-9.29
1/4-14.48
mph-95.015

mods are 90 crx Si with stock everything B16, AEM CAI, DC 4-2-1 header, STOCK CRX Si exhaust. im running an S1 tranny. Obd1 chipped P30 program. 205/50/15 falken azenis sports at 17lbs. I know there is a lot i need to do, but before i throw on slicks, id like to hit that 13 sec mark on street tires. just thought id share...analyze and enjoy
Mike
Merced Imports

 

Those are good times.

 

Getting 13 second slips on the street tires will be tough. I had to cut 1.7 60's(M/T 20x8 slicks) to get into the 13's w/ a bone stock B16 in a EF hatch.

Phil

 

looks just like my time & set up. I clicked off a 14.45 @ 92mph in my 88' Si.

 

Thanks for the replys guys. Another thing you guys can think of anything i will need to do to maybe get into the 13's i wanna hit 13's with no NOS or slicks i wanna do it on street tires. I wanna be a all motor 13's with B16.
MIKE

 

same as my old setup minus the ecu.......i ran 14.6@95 w/ a 2.263 60'

good times

 

good numbers, i ran the same time myseld b16a2 but in a 89 civic hatch std ...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by milruner &raquo;</TD></TR><TR><TD CLASS="quote"> Another thing you guys can think of anything i will need to do to maybe get into the 13's i wanna hit 13's with no NOS or slicks i wanna do it on street tires. I wanna be a all motor 13's with B16.
MIKE</TD></TR></TABLE>

Bump your c/r with some new pistons.Get some cams to support the higher c/r, and a better header. Most important. Get you head PnP. That should get you to shave off the .4 with no trouble. Also if your trannt has no LSD, get one. Good luck Mike.

 

Thanks for the info guys. I will keep you guys updated on what i do and when i hit 13's i will let you guys know.
MIKE

 

nice job Mike

 

hey man, you can run a 13 how it is, in my ef9 i ran a 13.94 @ 96.8mph with a 2.07 60ft (falken azenis tires)
stock motor, intake, dc 4-1 header, no exhaust. (roughly 2170lbs with driver)