what is the 96 itr code on the head and block

 

ok i bought a (96 jdm itr) but i looked around the motor the code on the block is b18c now i looked in back of the motor and it says p72? then i look at the manifold it is p73 ? the head code is pr3-2 and it comes with a lsd tranny so then i look at another motor that is a 96 type r and everything is the same thing can somebody enlight me

 

Everything sounds about right.
JDM swaps only say B18C on the block.

 

so it's a itr motor then?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CIVICGEN2 &raquo;</TD></TR><TR><TD CLASS="quote">so it's a itr motor then?</TD></TR></TABLE>

Yes, sounds like it, esp. with the head code and P73 manifold.

 

shouldnt the head say pr3-3 cause the one i got is pr3-2

 

and why it says p72 in the back and not p73

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CIVICGEN2 &raquo;</TD></TR><TR><TD CLASS="quote">shouldnt the head say pr3-3 cause the one i got is pr3-2 </TD></TR></TABLE>

Apparently ITR heads have pr3-2, pr3-3 and/or pr3-4.
Plus, and ITR intake manifold doesn't normally fit on a "GSR" head.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CIVICGEN2 &raquo;</TD></TR><TR><TD CLASS="quote">and why it says p72 in the back and not p73 </TD></TR></TABLE>

Because externally the GSR and ITR blocks are the same (i.e., P72).

You're OK.

 

THANKS MAN

 

You're welcome.