do u guys know what size intercooler that will fit on a front ek witout cuttin or touchin da front oem grill..

if u have one ...i would like 2 buy one..
also a boost controlleR!

***please post ur pix up...i wanna see it with the oem GRiLL***

 

bump!

 

the greddy type 31 and drag intercoolers work fine!

 

no1 has one for sale..cant b thicker then 2.5

 

i wanna see this too, because i wanna keep my oem fogs

 

Johnnyracecar.com

I had one of these for a year on my 97 coupe, the only cutting of the grill is on the backside cause the plastic goes far back inside to direct the air towards the rad and condensor, you do not see it at all from the front.

Almost any intercooler will have a little trimming to make it fit but like I said, no cutting of the grill needs to be done with the JRC intercooler on the front side that you see.

 

Dont remember the measurements but I believe this is an older Type 31 Greddy intercooler.




Shoot me an offer if interested.

 

here is mine. i even got the fogs to sit properly, unlike others who have fogs. the fogs tend to rub up agains the intercooler, coupling and blow out the bulb.

its a drag kit. the intercooler and the piping are the key items to making the fogs fit.

 

I have this-

Honda Civic 99-00 SI, Intercooler Type 31, Polished Aluminum Piping, 195mm x 600mm x 76mm

came off my 99 Si. Comes with piping. Used for 8k miles so it has some bent fins. PM me for pics/price

 

i pmed u!

 

I can't pm at work.. but i can send the pics tomorrow... 350 plus shipping?? I bought this new for 650.



only pic i have of it on the car with stock bumper.

 

send me pix...toom y email...whats ur email.???ill email it 2 u..

does it clear da grill n fog lights???

what size it it??

 

jamincivic99si@yahoo.com

It clears the grill and the lights should also. I didn't have to mod my bumper.

I believe the size is 8" tall / 24" long / 3" wide / inlets 2.5"

My old ricer pic

 

if its 3inch thick..den it wont clear the grill.cause i have one right now..its 3 inch n wont clear..

is urs drag kit?

or greddy?u got pix of evertrhing?

 

I had a greddy kit. Now I have more of a rev hard kit, but my i/c has been changed to an apexi. Its much larger and so is the piping so my stock bumper has been trimmed in the inside

you know what.. i guess i did have to trim a little bit in my inner bumper. Its been almost 4 years ago.. i just remebered cause of the scar on my finger!! LoL...

Greddy


Revhard