Well most of you know I ran the M20 cams for my turbo setup. I see all these post about what cams to use and etc etc. I use to run stock B16 cams, but they wouldn't make power past 8500 for me. It would just fall on its face.

So I talked to Robert and he hooked me up with a good M20 grind that would work for my turbo setup. Also the M20 is available as a regrind and in some cases he can also offer the M21 as a regrind as well. The M20's made great power and all the way to 9500rpm's. I could have made a lil more power past 9500, but it wasn't needed. On the M20's I made 388@10psi. I felt I could make more power with a slightly larger cam. I wanted to take full advantage of the headwork that Joe Alaniz did for me. So Robert hooked me up with this M20/M21 Turbo Combo that he says will make me more power throughout the powerband. These are grinded on new cores. This gives him the ability to also give me a slightly larger primary as well, since they were not regrinds. So I have a M21 intake and M20 on the exhaust. The profiles are a lil different from what he has listed on the website due to the fact these are made for a turbo setup.

So I will soon be back on the dyno and will compare these to some GSR cams "thanks hpfsi". I like to try new products and find out for myself what will make power.

No one has really taken the time to dyno or compare Crower cams, blox, or etc. I know these cams will make more power, and now I am just going to put it on paper.

Here are some pics and stay tuned.







Modified by BodyKits NW at 4:10 PM 4/5/2005

 

this might sound stupid ,haha, but wich cams are wich ???

 

Well the pictures above are pictures of the new cams Robert sent me.

1st pic Exhaust/Intake
2nd pic Intake/Exhaust
3rd pic Intake/Exhaust

Don't quote me on that cause I did take quite a few pics.

 

ok i thought it was the new cam next to a b16a one , lol , they look good

 

one thing i notice is that they have a very steep ramp on the opening side of the cam, maybe im looking at the wrong side of the cam, i dunno, lol

 

I wouldn't know lol. I am not much of a cam guy.

 

sweet dude!

 

Sweet...I've always loved the RM cams.

I'm going to be running just stock GSR cams this season (can still make 600hp with them), but I might swap them out for M21s next season.

Props for doing the test! Not very many people have the paitence.

 

I have the opportunity so I am going to give it a shot. I can probably make good power with GSR cams as well, but I figure why not try to get the most out of it. Especially when I spent good money on headwork. I think these cams will do very well.

 

Good luck! I'll be running Rocket cams in my turbo setup also.

 

any info yet?

 

Not yet, been working on my taxes. Waitin for a few more items to arrive and I also need to find time to install them.