wtb: 1.6l sohc vtec block. si, ex. san diego!!!!!!! or so cal
im lookin for a 1.6l sohc vtec block. it have to be in great condition. no spun bearings or anything. give me price
thanks
thanks
I have a complete D16Y8 that was partly rebuild.
new timing belt
new rods and pistons and rings and bearings (from Honda factory)
new honda headgasket. Head was port matched to intake and exhaust. intake is port matched.
only needs a oil pan and pickup.
motor ready to run and break in the rings.
(repalced pistons because about 2 yrs ago I "Cracked" the #3 ring land only. I replaced the pistons then with new factory stuff, but the #4 didn't seat properly. it only had "slight" oil blow by under boost only. so I decided to redo it again to resolve the problem. Should be perfect working order now.
let me know if interested. (Email me @ oscar@mayer.net)
new timing belt
new rods and pistons and rings and bearings (from Honda factory)
new honda headgasket. Head was port matched to intake and exhaust. intake is port matched.
only needs a oil pan and pickup.
motor ready to run and break in the rings.
(repalced pistons because about 2 yrs ago I "Cracked" the #3 ring land only. I replaced the pistons then with new factory stuff, but the #4 didn't seat properly. it only had "slight" oil blow by under boost only. so I decided to redo it again to resolve the problem. Should be perfect working order now.
let me know if interested. (Email me @ oscar@mayer.net)
i got a whole sohc zc long black for sale. comes with tranny and everythign u need to swap in there. tell me wassuop cuss i gotta get rid of this asap. pm me back or email me at urbabezdaddi3@yahoo.com pics will be provided when i get a chance to
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
zcsohcaminit
Honda CRX / EF Civic (1988 - 1991)
1
May 10, 2008 12:28 PM



