All Motor / Naturally Aspirated No power adders

I need a couple tinths off in the quarter

Thread Tools
 
Search this Thread
 
Old Mar 24, 2005 | 09:02 PM
  #1  
bluedevil's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2003
Posts: 79
Likes: 0
From: los angeles, ca, united states
Default I need help knocking off about two tenths in the quarter.

guys anybody, me and my friend have a little bet . He bet me i cant run a twelve second pass with the changes that iam going to do to my crx with a stock b16a in it first off let me tell you a little bit about the car the setup as of right now is a stock b16a with cam gears ,reprogramed ecu , lightened stock flywheel with a act full clutch itr headers , iam running a fuel pump with a gallon fuel cell on vp red race gas . THE CAR it self is super light it weighs 1700lbs with me in it fiber glass doors and front end fully gutted so this is not a street car and iam running on m&h 22inc slicks .At current date the fastest it has run was 13.09s ,13.08s .I have gsr cams i havent installed yet i also have header wrap for the headers iwas also thinking about trying one of those ctr crank pulleys single drive ones. so iam open to all suggestins to get me in the twelves iam not trying to spend a whole lot of money as you can tell. BTW the bet is on for next month that when iam running the car again. thanks in advance.


Modified by bluedevil at 11:34 PM 3/24/2005
Reply
Old Mar 24, 2005 | 10:20 PM
  #2  
Anthrolude's Avatar
 
Joined: Feb 2004
Posts: 151
Likes: 0
Default Re: I need a couple tinths off in the quarter (bluedevil)

after all that and you still think you have 2 headers?
Reply
Old Mar 24, 2005 | 10:30 PM
  #3  
vinasity's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 430
Likes: 0
From: O.C. FL
Default

i dont think the gsr cams are gonna do you much good. You should get a ctr intake cam and some tuning and you might be able to break in the twelves.
Reply
Old Mar 24, 2005 | 10:36 PM
  #4  
bluedevil's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2003
Posts: 79
Likes: 0
From: los angeles, ca, united states
Default

I heard the gsr cams will give me about five thats all i really need i hope.
Reply
Old Mar 24, 2005 | 10:38 PM
  #5  
vinasity's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 430
Likes: 0
From: O.C. FL
Default Re: (bluedevil)

there is a post on here where somone dynod both of the on a b16 and the b16 cams beat the gsr cams
Reply
Old Mar 24, 2005 | 10:48 PM
  #6  
vinasity's Avatar
Honda-Tech Member
 
Joined: Nov 2002
Posts: 430
Likes: 0
From: O.C. FL
Default

here you go mang
https://honda-tech.com/zerothread?id=1113834
Reply
Old Mar 24, 2005 | 11:13 PM
  #7  
bluedevil's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2003
Posts: 79
Likes: 0
From: los angeles, ca, united states
Default Re: (vinasity)

thanks for the info . iam also wrapping my itr headers and thinking about changing the crank pulley to one of those ctr crank pulleys.then iam going to dyno to see if it makes the hp i want.
Reply
Old Mar 25, 2005 | 05:28 AM
  #8  
b19coupe's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 9,854
Likes: 4
From: Southern California, U.S.A.
Default Re: I need help knocking off about two tenths in the quarter. (bluedevil)

Drop my engine in your 1700 lb. car and you have 12's for sure
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thorclark
All Motor / Naturally Aspirated
21
May 19, 2009 03:20 PM
The Dirty EJ1
Honda CRX / EF Civic (1988 - 1991)
2
Mar 30, 2008 05:01 PM
sullenht
Hybrid / Engine Swaps
17
Sep 27, 2004 12:34 PM
bluedevil
All Motor / Naturally Aspirated
7
Aug 2, 2003 07:39 AM
FredB16
Honda CRX / EF Civic (1988 - 1991)
21
May 14, 2002 02:51 PM




All times are GMT -8. The time now is 07:43 PM.