in the past I've herd that dropping an H22 into a civic can cause the engine mounts to break. what can you tell me???

 

would like to know to

 

My boy has an h22 in his EG and his mounts are still fine, he has a Hasport kit. He beats on his car pretty hard too, and there still holding up fine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperSpic &raquo;</TD></TR><TR><TD CLASS="quote">My boy has an h22 in his EG and his mounts are still fine, he has a Hasport kit. He beats on his car pretty hard too, and there still holding up fine. </TD></TR></TABLE>

good to know does anyone else have anything to say?

 

hasports are the **** The only mounts i can think of that would break are custom ghetto ones, or place racing

 

HCP mounts are good also. There is a bunch of info on all these mounts in the Hybrid forum.

 

HCP The engine sits very nicely in the car and it idles like stock. I've never heard of the HCP's having trouble (did quite a bit of research before deciding on which kit to get) I got mine brand new from ebay for dirt cheap... some are sold on there for 300 or so (buy it now) Good luck.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16hybridsol &raquo;</TD></TR><TR><TD CLASS="quote">hasports are the **** The only mounts i can think of that would break are custom ghetto ones, or place racing </TD></TR></TABLE>

I have place racing and so does Matt @ Onefab. None of them broke. Plus Matt races the crap out of them and doesn't seem to break a stock axle. Neither have I. I never seen a broken mount with place racing yet but I heard there was one. Personally, don't listen to what ppl tell you without proof. I can tell you from experience that with my mounts, I don't have any vibration nor have i suffered a broken mount.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pikachu &raquo;</TD></TR><TR><TD CLASS="quote">

I have place racing and so does Matt @ Onefab. None of them broke. Plus Matt races the crap out of them and doesn't seem to break a stock axle. Neither have I. I never seen a broken mount with place racing yet but I heard there was one. Personally, don't listen to what ppl tell you without proof. I can tell you from experience that with my mounts, I don't have any vibration nor have i suffered a broken mount. </TD></TR></TABLE>
yea i mean i like to just jump on here and make random **** up just to spite people like you . Or maybe i've seen the **** and and watching out for people maybe you had luck, but i've seen 2 h22/eg swaps with placemounts, 2 hasport/eg/dc2 swap and the place racing swaps broke axles on stock jdm h22as where as the hasport cars didn't, one of them being my own.

You could/can also see that the placeracing mounts made the h22 sit cocked in the bay slightly. and if thats not enough you can seea crack down the weld on the rear mount on one of the place racing cars. I'm not the only one on here that knows how shitty their mounts are, if you search around, i know i've seena thread on here where someone did a write up on how crooked the placeracing mounts made their h22 sit.

 

I run hasport mounts and I have never broken an axle due to misalignment and have never broken a mount, but I did rip off the part of my tranmission housing that my rear mount connects to. LoL

 

I have used the Hasport mounts and the Enjo mounts. The hasport mounting is a shitload bulkier and didn't locate the engine as good as the Enjo's. Surprisingly, the Enjo's are far simpler in construction, cheaper, and definitely better having had both. Go with Enjo's...you even get nice work gloves with the mounts

 

Any broken mounts or axles with that setup?