Any1 got a pair 550 or 600 lbs ERS springs they wanna give or sell cheap to no job racing? Lemme know.

 

I've got a pair of 550# 8" in my garage. Email me an offer at gripp@evergo.net

-Mike

 

What length and diameter? I have 550's in the garage somewhere, I need to find them...

 

I need them for the rears of a GC/Koni setup. Should be 7" LO and 2.5" DI. 0700.250.0550. I don't have the GC yet, so I am not 100% sure.

 

May I butt in and ask a couple stupid questions here? What does ERS stand for? Also, Zsolt, if you're getting GCs for you car, won't they already have the springs with them? Or are just getting the thread coilover body with no springs, or are you getting them w/ springs but not with the spring rates you want? Thanks. -Casey

 

``Eibach-Race Spring-System'' ... I think. Anyway, ERS is Eibach's racing spring.

I am buying a set second hand which has 400/300 on it.

 

Thank you, Sir.

 

If you don't have the GC setup yet, then why are you buying the springs seperately? Just call up GC, ask for the long sleeve kit for your car w/ custom spring rates. They charge retail, but they you won't buy an extra set of springs.

Warren

 

See above ...

 

The 8" springs should work on the rear. The konis have moveable spring perches and the coilover/lowered perch should work with the longer spring.

I have 8" 1000lb springs with konis on the rear of mine. Lowest spring perch.

 

So... You want 'em?

If you pay shipping both ways, I'll trade you straight for the 300s or 400s, whichever you're not using. Otherwise, I'll just sell 'em to cheaper than you'd pay new.

-Mike

 

Heck ya I do!

I still need to work out the details of getting the GCs for the guy. Should not take more then a few days. You will be getting the 300s. Cool?

 

Sure.

email me: gripp@evergo.net

Cuz I'll probably forget to keep checking this thread.

-Mike