If you use the MSD knock alert or have had first hand experience w/ it I would like to hear your comments on it. The reason I am leaning toward the MSD unit is the ability to adjust the sensitivity. I will be investing in a knock monitor soon so, if you have any other suggestions LMK. Thanks.

Phil

 

http://www.plxdevices.com/R-500_productinfo.htm

 

I tried the MSD one on an engine dyno a few years back.I don't think it filters well enough.It would read knock when there was none present or just pin during the whole run.A few people recommended the j&s unit http://www.jandssafeguard.com/ .It needs to sample and see a trend.I don't think the MSD one is that sophisticated.
Glenn

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MooreBoost &raquo;</TD></TR><TR><TD CLASS="quote">http://www.plxdevices.com/R-500_productinfo.htm</TD></TR></TABLE>

No need for all of those functions

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJIN BUILDR &raquo;</TD></TR><TR><TD CLASS="quote">I tried the MSD one on an engine dyno a few years back.I don't think it filters well enough.It would read knock when there was none present or just pin during the whole run.A few people recommended the j&s unit http://www.jandssafeguard.com/ .It needs to sample and see a trend.I don't think the MSD one is that sophisticated.
Glenn</TD></TR></TABLE>

Thanks alot for the info

Phil