MSD Knock Alert discussion
03-12-2005, 06:56 AM
#1
Honda-Tech Member
Thread Starter
MSD Knock Alert discussion
If you use the MSD knock alert or have had first hand experience w/ it I would like to hear your comments on it. The reason I am leaning toward the MSD unit is the ability to adjust the sensitivity. I will be investing in a knock monitor soon so, if you have any other suggestions LMK. Thanks.
Phil
Phil
03-12-2005, 07:16 AM
#2
Honda-Tech Member
Join Date: Jul 2002
Posts: 4,784
Likes: 0
Received 0 Likes
on
0 Posts
03-12-2005, 08:14 AM
#3
Honda-Tech Member
Join Date: Mar 2003
Location: Hudson, NH, 03051
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Re: MSD Knock Alert discussion (hondaguyef)
I tried the MSD one on an engine dyno a few years back.I don't think it filters well enough.It would read knock when there was none present or just pin during the whole run.A few people recommended the j&s unit http://www.jandssafeguard.com/ .It needs to sample and see a trend.I don't think the MSD one is that sophisticated. 
Glenn
Glenn
03-12-2005, 10:24 AM
#4
Honda-Tech Member
Thread Starter
Re: MSD Knock Alert discussion (MooreBoost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MooreBoost »</TD></TR><TR><TD CLASS="quote">http://www.plxdevices.com/R-500_productinfo.htm</TD></TR></TABLE>
No need for all of those functions
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJIN BUILDR »</TD></TR><TR><TD CLASS="quote">I tried the MSD one on an engine dyno a few years back.I don't think it filters well enough.It would read knock when there was none present or just pin during the whole run.A few people recommended the j&s unit http://www.jandssafeguard.com/ .It needs to sample and see a trend.I don't think the MSD one is that sophisticated.
Glenn</TD></TR></TABLE>
Thanks alot for the info
Phil
No need for all of those functions
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJIN BUILDR »</TD></TR><TR><TD CLASS="quote">I tried the MSD one on an engine dyno a few years back.I don't think it filters well enough.It would read knock when there was none present or just pin during the whole run.A few people recommended the j&s unit http://www.jandssafeguard.com/ .It needs to sample and see a trend.I don't think the MSD one is that sophisticated.
Glenn</TD></TR></TABLE>
Thanks alot for the info
Phil
Thread
Thread Starter
Forum
Replies
Last Post
QuickHonda
Forced Induction
7
05-20-2002 10:03 AM
