What is this?? one piece is not connected (Hand), can it cause any damage, or it not to run right??

 

i would have to check the manual, but off the top of my head, i think that hose connects in/on the throttle body/intake manifold.

 

charcoal canister, throw it out if you dont have emissions...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator &raquo;</TD></TR><TR><TD CLASS="quote">charcoal canister, throw it out if you dont have emissions... </TD></TR></TABLE>

lol ok..so its just junk?

 

Yes it connects to the top of the throttle body. There should be a fitting for it to plug on to.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by N.O.R.E &raquo;</TD></TR><TR><TD CLASS="quote">

lol ok..so its just junk?</TD></TR></TABLE>

It is junk if you don't have emissions testing. You will need it to pass the emissions test.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91civic &raquo;</TD></TR><TR><TD CLASS="quote">

It is junk if you don't have emissions testing. You will need it to pass the emissions test.</TD></TR></TABLE>

iight thanks

 

so if u junk it, what do u hook all the other lines to...is there a how to somewhere.

 

i removed mine. i just plugged the hoses off the TB that were not going to be used anymore.

 

ok nm i searched, but it didnt they any thing about the hose that connect to the bottom of it. do i just route that down to the ground(road) too?