FS: BARELY USED VAFC2 and BRAND NEW QTP 3" ELECTRIC EXHAUST CUTOUT
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 167
Likes: 0
From: Phoenix, AZ, 44691
FS: BARELY USED VAFC2 and BRAND NEW QTP 3" ELECTRIC EXHAUST CUTOUT
This is the blue vafc2...i had it in my car for a short period of time and didn't really do anything with it other than change my vtec point...i'm currently turbo and have no need with this with my current fuel management...was used on the car for 2 months or less
this comes with the original box, manuals, instructions, etc. but no stand...excellent condition
asking $240 shipped
i purchased this awhile back and never got around to installing it...i even had a second flange fabbed for the stock header so you would just cut a hole in the stock header and weld this on...it is a very small piece that is angled and is fairly similar to the Y that comes with the kit, just smaller...the Y is easier to install though...both are included
http://www.quicktimeperformance.com/QTEC/ for more info on what it is
this is supposed to be the best electric cutout and on a turbo rsx, stock exhaust compared to this gained 40whp+ and on an otherwise stock rsx, this will net more power gains than ANY exhaust on the market PERIOD
this is the 3" model like this http://www.quicktimeperformanc...l&p=3
brand new this is $190 + shipping
mine is brand new and has never been installed...it comes with everything seen in the picture as well as the new fabbed piece (i have pics of the cutout that i took when i got it but no new pics of the fabbed piece...my friend currently has my digi cam so i'll take pics when i get it back if necessary)
decided to sell because i decided to go for a full 3" mandrel bent exhaust instead
check my ebay references on the name "slow12s" or IM me at the same name if you have questions
priced to sell immediately: $175 shipped firm
this comes with the original box, manuals, instructions, etc. but no stand...excellent condition
asking $240 shipped
i purchased this awhile back and never got around to installing it...i even had a second flange fabbed for the stock header so you would just cut a hole in the stock header and weld this on...it is a very small piece that is angled and is fairly similar to the Y that comes with the kit, just smaller...the Y is easier to install though...both are included
http://www.quicktimeperformance.com/QTEC/ for more info on what it is
this is supposed to be the best electric cutout and on a turbo rsx, stock exhaust compared to this gained 40whp+ and on an otherwise stock rsx, this will net more power gains than ANY exhaust on the market PERIOD
this is the 3" model like this http://www.quicktimeperformanc...l&p=3
brand new this is $190 + shipping
mine is brand new and has never been installed...it comes with everything seen in the picture as well as the new fabbed piece (i have pics of the cutout that i took when i got it but no new pics of the fabbed piece...my friend currently has my digi cam so i'll take pics when i get it back if necessary)
decided to sell because i decided to go for a full 3" mandrel bent exhaust instead
check my ebay references on the name "slow12s" or IM me at the same name if you have questions
priced to sell immediately: $175 shipped firm
.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 167
Likes: 0
From: Phoenix, AZ, 44691
Re: FS: BARELY USED VAFC2 and BRAND NEW QTP 3" ELECTRIC EXHAUST CUTOUT (PA MATT)
the flange is 3" to fit the cutout, and most of the pipe is 3", but we made the end slightly smaller so as to make it easier to weld in...basically this piece is made to take up a little less space than the y pipe and you can basically cut a small hole in your downpipe/header/whatever and weld this in (hence the angle)
heres a few pics...this comes with both the y pipe and this so you can choose which one you want to use and either keep or sell the other one
heres a few pics...this comes with both the y pipe and this so you can choose which one you want to use and either keep or sell the other one
Joined: Jun 2003
Posts: 45
Likes: 0
From: Singapore
Re: (MrBurner)
interested in the cutout...email me at kiwak@excite.com to discuss...neway im from Singapore..can u ship it there?
Honda-Tech Member
Joined: Aug 2001
Posts: 4,451
Likes: 0
From: 909, Ca, US
Re: FS: BARELY USED VAFC2 and BRAND NEW QTP 3" ELECTRIC EXHAUST CUTOUT (MrBurner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MrBurner »</TD></TR><TR><TD CLASS="quote">...this is supposed to be the best electric cutout ......</TD></TR></TABLE>
sorry to burst your bubble but just so you don't misinform people...that is not true
sorry to burst your bubble but just so you don't misinform people...that is not true