hey guys, This guy says its a d16 from a 90 integra. but its in his 91 civic. It doesnt come with a trans, from the info I got. Its a ZC d16. can anyone tell by lookin at this???

 

It's not a ZC; black-top DOHC ZC valve covers are different. Looks like a D16A1/D16A3 from an '86-89 Integra.

 

Hmm...didn't you post this somewhere else recently? I'll repeat the same info from before. 86-89 tegs had d-series, 90+ tegs have b-series. The only way to know FOR SURE what engine it is would be to read both the code stamped into the block and the code cast into the head. Here is what we DO know. That head looks like a D16A1/1g ZC head, which only came on engines that fit in 86-89 tegs. If he really does have it swapped into a 91 civic, then either he has a 2g dohc zc block with a 1g dohc zc head on it (very possible), or he made custom mounts to swap a 1g zc into a 91 civic (less likely because no one does this, but still possible). Again, only YOU can know for sure because only YOU have access to read the head and block codes. Please don't post a reply until you have them.

 

nice lecture....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doctor Zagato &raquo;</TD></TR><TR><TD CLASS="quote">nice lecture.... </TD></TR></TABLE>


yeah actually it was.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by All The New Rage &raquo;</TD></TR><TR><TD CLASS="quote">


yeah actually it was.</TD></TR></TABLE>

i second that

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doctor Zagato &raquo;</TD></TR><TR><TD CLASS="quote">nice lecture.... </TD></TR></TABLE>
I'm sorry, but do you have a problem with someone actually spelling out what the possible solutions are to his puzzle?

 

lol it's funny because it actually was a nice lecture

 

That looks like the thing from ebay..

I emailed that guy and told him that there were b18's in 90+ integras it looked like a 86-89 integra motor and that there ..I say this because he said it needed custom mounts to make it fit so its obviously not a zc..And also he said the stock d16a6 tranny wouldnt work..My guess is d16a1..

 

ahhh ****, **** this guy. Milled head, high compresion? yah Im SURE. I also e-mailed the guy to ask him if its running. he said yes. I said, Where in FT laud are you, Ide like to come see it. No response, Dead beat ******.