WTS or WTT My 18" RH CP10s in black two have been curbed and or dented. Both hold air. The other two are completely fine no damage. All rims are black. Two of the rims have bald tires on them. Bought them like this...but i can't use them since they are 5 lug. They are being sold as is. This is how i got them this is how i am selling them. Pictures are available and most are posted in this thread. Asking 215 picked up 320 shipped. Ill take trades for some 16" rims that you have. Let me know. Or anything else that you might like to trade for these rims that I may need. No junk please. I would rather have cash for the rims. I NEED THEM GONE ASAP. Please do not lowball me or waste your time and my time if you are not seriously interested in the rims. Please do not ask me to check what the shipping costs are there posted already. Its 320 shipped...thats without the tires also. The wheels will be shipped in two seperate boxes so they wont be damaged. Two rims in each box. Sent at the same time. Tracking numbers will be provided when they are sent out. They will be shipped through UPS most likely since they are easiest. If you want to paypal me please include a 3%. I will take cashiers check, cash, or money order otherwise.

have a GSR transmission case off of my 1994 Integra GSR. It has a transmission in it thats broken. The casing is Fine..nothing wrong with it..no cracks..holes...or anything else...just normal scratches and such from 10-11 years of use. Before it was taken out the first and second gear didn't work. Gimme offers. Im located in VA.

Price lowerd for the rims

<U>Asking 150 picked up If youw ant it shipped...find out how much it will cost...what company....and i will send it out through that. I can't go around finding out shipping costs for everyone. Same thing goes for the RIMs

YOU CAN ASK ME THOUGH...no prob...only if your serious though will go out and actually look at the shipping costs.

215 picked up for the rims. </U>

NEED THEM GONE give me offers willing to negotiate
Will take trades.

Looking for
4-1 headers for B series
other rims (pref 16" maybe 15" rotas, stock gsr rims no 96, stock si wheels) must be 4x100 lug.
P72 or P28 socketed for hondata.
CF trunk for 4 door integra.
anything else in that nature for my integra


Any other questions please feel free to ask.

Modified by Liquidgsr at 6:55 AM 3/8/2005


Modified by Liquidgsr at 9:11 AM 3/13/2005


Modified by Liquidgsr at 10:01 AM 3/15/2005


Modified by Liquidgsr at 6:54 PM 3/15/2005

 

up

 

u up now

 

pmed

 

up

 

up

 

u got pics of these rims?

 

they are a little cleaner cuz i just cleaned them. Damage to the rims are barely noticeable.






once you put a tire on this one you wont notice that the lip was ever dented.


The lug hole is weird, but once a lugnut is put over it you wont notice anything at all.

 

im interested, there not going on a honda so im a need some extr info if you dont mind. i need to know the offset, should be on the inside of the rim and say et. and do u know if the bolt pattern is 5x100 or 5x114.3

 

ok ill check and see what the offset is. The inside of the rim says 5x100 then it says 5x114.3, but there are 5 normal lug holes and 5 small ones. I am pretty sure they are 5x100. I will check and see what the offset is though. The lug pattern corresponding to the hole would be right under it right?

 

also for the transmission. I have been getting lots of people inquiring. I ask that you give me a offer of what you are willing to pay for it. If you want to have it shipped i will not be able to find the definate cost of the shipping, but it will be by UPS ground which i think would be the cheapest. I wont be going around trying to find the cheapest place so UPS ground will have to do for that. Please consider the cost of shipping with your offers if you want it shipped.

You can low ball me if you want but with the amount of inquiries I am getting its just going to be a waste of your time.

Thanks for looking and please bump this if you look.

Again I want this stuff gone ASAP. Money would be good becuase im saving up for a turbo kit....but trades will be considered also.

 

heres some pictures of the inside of the rim take a look


[IMG][http://www.we-todd-did-racing.com/we...DE%3D.jpg/IMG]
18x7




hope those help. You should be able to tell what bolt pattern it is from those pics i think. Let me know.

 

up

 

u up

 

UP

 

up again

 

up

 

up

 

bump still need the tranny and rims gone.

 

up again

 

bump again 215 picked up.

 

im interested in the transmission, how much would it be to ship to louisiana?

 

around 300-350

 

someone but the rims

 

up