How much were you charged to install sleeves in your block? What is the average price. And if I get darton sleves and je nitrous pistons how much can I spray "no head work YET" Any help highly appreciated.

 

Around $900-1000.

 

For the big boy sleeves, between about $800 and $1000

 

Prices start at $635.20 installed for the flanged sleeves and $1260.00 for the MID kit installed. Turn around usually 1 week.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LudeyKrus &raquo;</TD></TR><TR><TD CLASS="quote">For the big boy sleeves, between about $800 and $1000</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">Around $900-1000.</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Darton Sleeves &raquo;</TD></TR><TR><TD CLASS="quote">Prices start at $635.20 installed for the flanged sleeves and $1260.00 for the MID kit installed. Turn around usually 1 week. </TD></TR></TABLE>

So shipping will raise the figures?

 

MID kit?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _BB6 &raquo;</TD></TR><TR><TD CLASS="quote">MID kit?</TD></TR></TABLE>

Modular Integrated Deck

 

Also I'd assume all these figures assume that the person is going to remove and reinstall the block themselves right?

 

yeah i wna know this too.
for 635.20 i'd buy that anyday.

 

darton work is awesome.. they did my gsr block and it held 30 psi til i sold it... awesome work

 

prices prices!!
cmon nowww.
haha.
i know they do good work.
i wna know how much i have to fork over for it.
nothing stays at starting prices..
i pm'd benson sleeves on here but he has yet to pm me back.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94Vtecluder &raquo;</TD></TR><TR><TD CLASS="quote">Also I'd assume all these figures assume that the person is going to remove and reinstall the block themselves right?</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _BB6 &raquo;</TD></TR><TR><TD CLASS="quote">yeah i wna know this too.
for 635.20 i'd buy that anyday.</TD></TR></TABLE>

Yeah that'd definately be maching only. Laskey Racing sells Benson sleeved blocks which use a special Darton sleeve available only to Benson's. Thats some good **** I hear.