I have a D16 SOHC Vtec engine. If i were to turbochared it at about 7psi, how much HP and/or TQ do you think i can get out of it??

 

100whp

 

depends on what your setup and turbo will be..

i make 200whp at 7psi on my Z6.

 

what exactly do you mean by my "setup"?

 

your a n00b and you need to research. this question has been answered many times. also, i suggest looking at other peoples results to get an idea of what youll be able to get out of your motor. every setup is different, you cannot generalize how much power/tq your motor will put out.

 

ok, but i have another question which is sort of broad. But if i swapped my head with a B16 head, do you think it will be worth the money??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tdawg1030 &raquo;</TD></TR><TR><TD CLASS="quote">ok, but i have another question which is sort of broad. But if i swapped my head with a B16 head, do you think it will be worth the money??</TD></TR></TABLE>

Please tell me you are kiding....

B series and D series are completely different...

And to answer the question.. it would be no.. because you would have to resell the head when you found out it didn't fit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Edge.ONE &raquo;</TD></TR><TR><TD CLASS="quote">
i make 200whp at 7psi on my Z6.</TD></TR></TABLE>

**OT**

You do?! That's darn good for a d16z6 @ 7psi... any details on your setup?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tdawg1030 &raquo;</TD></TR><TR><TD CLASS="quote">I have a D16 SOHC Vtec engine. If i were to turbochared it at about 7psi, how much HP and/or TQ do you think i can get out of it??</TD></TR></TABLE>

Shut up noob

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonvtecD &raquo;</TD></TR><TR><TD CLASS="quote">

Shut up noob</TD></TR></TABLE>

buwahahahaa, roflmfao

 

yea well at least i dont have a weak *** civic mr. "NON VTEC"

 

well, vtec or no vtec, he's still faster than you. And since it appears that you are at you 5 post a day limit, we will continue to talk **** about you until the timer rolls over

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tdawg1030 &raquo;</TD></TR><TR><TD CLASS="quote">yea well at least i dont have a weak *** civic mr. "NON VTEC"</TD></TR></TABLE>

Why don't you try lining up against him then... don't start **** on here already.. yu have only like 5 posts. You have no clue obviously.

Haha, so yea.. you can talk tomorrow at like 10 or so.. sound good?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 &raquo;</TD></TR><TR><TD CLASS="quote">

Why don't you try lining up against him then... don't start **** on here already.. yu have only like 5 posts. You have no clue obviously.

Haha, so yea.. you can talk tomorrow at like 10 or so.. sound good?</TD></TR></TABLE>

PWNED!!!!! i think he watched the too fast too furious movies a few too many times and thought that "v-tech" was the way to go. next he'll post a question about "nozzin" his vtec mota. ahhahahaah.

 

you people are gay anway (except for the people that actually responded to my question). if you think the question is stupid, dont respond.

 

ok, in all seriousness. With what little info youve given us, its too hard to tell. each motor is different, so a setup that ran great and produced tons of power on someone elses motor might not do the same on yours

we need more info, like what turbo youd be running, manifold, fuel management, intercooler, etc

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tdawg1030 &raquo;</TD></TR><TR><TD CLASS="quote">you people are gay anway (except for the people that actually responded to my question). if you think the question is stupid, dont respond.</TD></TR></TABLE>

Just had to point out that your question was stupid. You will learn man. Just look around and see what is out there. If you don't want the hassle of putting a kit together.. just get a greddy kit. If not look around, and see what people are running. Use the search button man..

 

Wow dude you got ******* owned. Stupid noob. Learn to research and then you can ask questions. No one is going to spoon feed you info. Make the effort yourself.