who makes light weight rotors for honda's? trying to drop more rotational weight

 

ats does but they are prtty damn expensive. check it out
http://www.passwordjdm.com/pro...tails
and by the looks of it you may have to also get the 5 lug to make it work.
btw probably not what you are looking for since you are probably looking at it for drag racing purposes.

 

"drag racing" you would be correct

 

yeah i would also like to know if there are any lightweight rotor options out there for a daily driver
even if we could get the weights for
autozone
oem
etc

 

holy **** those are expensive! $3,800! but extremely light 3.8 lbs..

it says on the site:

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">For autocross and drag race only</TD></TR></TABLE>

 

wilwood makes a single piston billet 1/4'' rotor seen on many a/m cars out there cost would be about 1300.00

 

so im guessing my cheapest solution would be to get some brembo crossdrilled/slotted and have them turned as far as you can go....

 

what knucles are you running. ive made a cheap set for integra hubs. it will only drop 2 lbs a rotor . but there will be no failures and uses stock calipers.

 

can't you just down grade to dx brake?