ok well im building my motor, cmp is gonna be around 12.5 - 13. just wondering what kind of power the buddy club stage 3's yield over skunks stage 2's, and type r cams. thanks for the help

 

anyone?

 

Spec 3+ or just regular 3s? I'll be getting my car tuned so i'll let you know how it goes from there. Also from dynos I've seen the spec 3+ made a tad more midrange then ctrs and at top it just keeps pulling. I think it peaks around 8200-8400k.

 

With compression that high, I'd look into the buddyclub IV's instead.

 

I agree. With comp over 11.5:1, I'd say just go with the BC 4's as well. Those would be more comparable to the Skunk2 Stage 2's then the BC 3's.

 

im not sure if itll be that high, im using Ctr pistons in a b16 with a this gasket, so im shooting for around 12.4 or so................ found some spec 3+ for 300

 

And i also have some crower stage 3 cams lined up too, just wondering if they are worthy, or if they are just to friggin big.

 

I would think the 3+ would be good for you b/c of the low end torque they produce
If you are looking for peak #'s get some S2S2

I liked my BC3+ alot