YEa baybee...after 6 long months after my motor swap...I finally get a chance to see what my baybee can do. Heere is the info.

First Run= 14.5 Quarter mile, 2.5 60 foot, 96mph trap speed

Second Run= 14.3 Quarter mile, 2.3 60 foot, 97mph trap speed

Third run= 14.1 Quater mile, 2.2 60 foot, 98 mph trap speed

93 Honda Civic Cx Hatch
95 JDM B18c GSR swap with I/H/E with test pipe
Short Shifter...ghetto Autozone clutch and flywheel

This was at Sacramento Raceway on Feb 9th 2005

Let me know what you guys think? Am I where I should be at? Or am i running slower than I should? Im assuming it was pretty decent because of the reactions people gave my when I told them what I had. But any feedback would be much appreciated. Thanks yall! And I'll be posting my times again in 2 weeks! I'll be getting a Exedy flywheel and ACT clutch by then...hopefully.

 

good times then again a b18c swap are one of hondas most honorable engines. 170hp stock .. what mods have you made to the car? you can get faster with a b18

 

Do u mean motor wise or exterior? Motor wise its all stock basically with bolt ons....JDM b18c GSR with AEM cold air and K&N filter, DC 4-1 header, HKS hiper exhaust with custom testpipe, ngk plug wires and ngk copper plugs, custom ground wire kit, stock flywheel, ghetto autozone clutch and plate.

 

lol autozone
I would use a stock exedy clutch disc

 

good times for stock , rapes my D16Y8 ... you should get some upgrades on that engine. i would be puting all i can on a b18c, those cost around 3k

 

well i got a good deal on my motor because the guy i ordered it from fucked up on the first order and the motor was returned to him when it got to the U.S. because some kind of paper work was wrong...or so he says. I ended up talking him down to 2200 for the complete motor except the mounts. So i didnt spend 3k for it...but after all the bolt ons...etc...etc... 3k sounds about right. hahhaha

 

nice times

 

good runs man!

 

Nice times, doing my GSR swap tonight, hope i can hit those numbers.

 

thats nice planning to do one in a couple of months after i get an ek! hell yeah hope its gonna be super quick!

 

nice times. all you need is to get that 60 foot down to like a 1.8 and you'd be 13s

 

Those JDM GSR motors are awesome...good times

 

Seems about right to me. Built to Spill ran a 14.0 with a bone stock JDM GSR and no exhaust in a CX hatch.

 

From what I've heard a b18c dropped in a eg is suppose to be high 13's stock...but I guess it depends on driver, tuning, and environment. I know when I had mine I hit 13.9 with a stock b18c in a 92 vx.

 

OMG...your track is already open...hell does it even close?? Ours shuts down for months because of winter .... Man that rocks...good numbers man...

 

nice, improvements on each run

 

Thanks for the info and comment guys...hopefully i can get it down to 14.0 or 13.9 with some better tires...i was having a little bit of traction problems...but theres only so much u can do with cheapo kumho tires right? And besides, Sacramento Raceway is known to be a slow track too. haha o well, at least we have a track...

 

i wonder what an ek could do with a k20a2 motor... humm maybe i should pull it outta my car and swap it for a weekend...hahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team_MISCHIEF_916 &raquo;</TD></TR><TR><TD CLASS="quote">
Third run= 14.1 Quater mile, 2.2 60 foot, 98 mph trap speed </TD></TR></TABLE>

very nice time for those mods you have

 

i say those are pretty good times

 

good times with your new clutch and flywheel and a good tune, you will be hits 13s!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team_MISCHIEF_916 &raquo;</TD></TR><TR><TD CLASS="quote">Thanks for the info and comment guys...hopefully i can get it down to 14.0 or 13.9 with some better tires...i was having a little bit of traction problems...but theres only so much u can do with cheapo kumho tires right? And besides, Sacramento Raceway is known to be a slow track too. haha o well, at least we have a track... </TD></TR></TABLE>

Whats up. I was out there that night also. Reg EG, snapped my axle on the first attempt at a pass. I ran 14.1 @ 102mph after I got it all fixed, but traction blows. I run Azenis out there and best I can cut is a 2.2 60.. I have to let off in first and second from the traction issues. Best time I have cut out there is a 13.8 @ 102mph. Check this out!

 

 

Good time. I ran 14.2 in my 4dr eg with about the same setup. I weighed in at 2600. My car needs a diet.