Few new pics of my car........
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 1,665
Likes: 0
From: Tri Cities Diddy, IL
Few new pics of my car........
Just recently got my car back after over-boosting and spinning a bearing in the winter.
I Cleaned up the engine bay a little so far and took a few pics. Cant really give it a nice wash because of my knee injury.
Enjoy
This is what it looked like before
This is how it is as of now
Painted BOV + Chargepipe and a few misc things flat black. Wrapped the manifold, and just cleaned up a little.
The fleet Can you guess the cars?
Modified by Boltz at 9:53 PM 5/28/2005
I Cleaned up the engine bay a little so far and took a few pics. Cant really give it a nice wash because of my knee injury.
Enjoy
This is what it looked like before
This is how it is as of now
Painted BOV + Chargepipe and a few misc things flat black. Wrapped the manifold, and just cleaned up a little.
The fleet Can you guess the cars?
Modified by Boltz at 9:53 PM 5/28/2005
Senior Member
Joined: Dec 2004
Posts: 10,137
Likes: 0
From: EMAIL ME at Chase@ChaseBaysOnline.com
Re: Few new pics of my car........ (JoshuaVTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoshuaVTEC »</TD></TR><TR><TD CLASS="quote">Then bay kinda looks funny since it doesn't match the outside but 
</TD></TR></TABLE>
ALOT better than some other cars i have seen, but this isnt so bad. It just makes the engine bay/stock paint look orange-ey
</TD></TR></TABLE>ALOT better than some other cars i have seen, but this isnt so bad. It just makes the engine bay/stock paint look orange-ey
Honda-Tech Member
Joined: Mar 2004
Posts: 5,195
Likes: 0
From: vancity
Re: Few new pics of my car........ (sikciv666)
Engine bay looks good. I'd paint the valve cover to match you exterior paint or polish it to a high gloss finish. The flat black looks tight though. to you. My buddy with a D-series would love yer set-up. He wants to boost his ride pretty bad. Nice to see a d16 that's been taken to that level.
to you. My buddy with a D-series would love yer set-up. He wants to boost his ride pretty bad. Nice to see a d16 that's been taken to that level.
Honda-Tech Member
Joined: May 2003
Posts: 5,735
Likes: 0
From: Portland, Oregon
Re: Few new pics of my car........ (white rocket)
Looks nice
I love the paint... wish I had the money to paint my car like that...
Is that a Drag mani? Was it hard to wrap? I thought about wrapping my Drag manifold before I put it on but didn't think it was worth it... was it worth it to you? Any difference in underhood temps?
I love the paint... wish I had the money to paint my car like that...
Is that a Drag mani? Was it hard to wrap? I thought about wrapping my Drag manifold before I put it on but didn't think it was worth it... was it worth it to you? Any difference in underhood temps?
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 1,665
Likes: 0
From: Tri Cities Diddy, IL
Re: Few new pics of my car........ (Ebp00Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by white rocket »</TD></TR><TR><TD CLASS="quote">Engine bay looks good. I'd paint the valve cover to match you exterior paint or polish it to a high gloss finish. The flat black looks tight though. to you.</TD></TR></TABLE>
Thanks, I think im going to paint the valve cover VHT wrinkle red or black, probably end up doing black
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek9800 »</TD></TR><TR><TD CLASS="quote">more pic's of the lawn mower
</TD></TR></TABLE>
It happened to sneak its way in there
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ1 wilcox »</TD></TR><TR><TD CLASS="quote">Is that a Drag mani? Was it hard to wrap? I thought about wrapping my Drag manifold before I put it on but didn't think it was worth it... was it worth it to you? Any difference in underhood temps?
</TD></TR></TABLE>
Rev-Hard mani, wasn't easy to wrap but wasnt difficult, took about 3 trys to get it where I wanted it, because at first I didnt know where to start. I ended up doing the middle runners first because they are the smallest and went outward to the edges. No numbers on how it helped but now my hood doesnt get nearly as hot, and after I run my car the heat wrap is ussually not too hot (sometimes I test my luck any touch it, no burns yet.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Moogen Powah »</TD></TR><TR><TD CLASS="quote">Nice
Any numbers w/ the turbo?</TD></TR></TABLE>
Yea, https://honda-tech.com/zerothread?id=1027900
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ebp00Si »</TD></TR><TR><TD CLASS="quote">Looks nice, what color is the paint?</TD></TR></TABLE>
It is a candy red color I matched up. PM me if you wanna know about it
Thanks for the compliments
to you.</TD></TR></TABLE>Thanks, I think im going to paint the valve cover VHT wrinkle red or black, probably end up doing black
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek9800 »</TD></TR><TR><TD CLASS="quote">more pic's of the lawn mower
</TD></TR></TABLE>It happened to sneak its way in there
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ1 wilcox »</TD></TR><TR><TD CLASS="quote">Is that a Drag mani? Was it hard to wrap? I thought about wrapping my Drag manifold before I put it on but didn't think it was worth it... was it worth it to you? Any difference in underhood temps?
</TD></TR></TABLE>
Rev-Hard mani, wasn't easy to wrap but wasnt difficult, took about 3 trys to get it where I wanted it, because at first I didnt know where to start. I ended up doing the middle runners first because they are the smallest and went outward to the edges. No numbers on how it helped but now my hood doesnt get nearly as hot, and after I run my car the heat wrap is ussually not too hot (sometimes I test my luck any touch it, no burns yet.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Moogen Powah »</TD></TR><TR><TD CLASS="quote">Nice
Any numbers w/ the turbo?</TD></TR></TABLE>
Yea, https://honda-tech.com/zerothread?id=1027900
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ebp00Si »</TD></TR><TR><TD CLASS="quote">Looks nice, what color is the paint?</TD></TR></TABLE>
It is a candy red color I matched up. PM me if you wanna know about it
Thanks for the compliments
Re: Few new pics of my car........ (ek9800)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek9800 »</TD></TR><TR><TD CLASS="quote">look's good.
more pic's of the lawn mower </TD></TR></TABLE>
more pic's of the lawn mower
</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Jul 2002
Posts: 1,665
Likes: 0
From: Tri Cities Diddy, IL
Re: (turbo95eg6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbo95eg6 »</TD></TR><TR><TD CLASS="quote">nice single cam setup....no dumptube 
what are you running at the tracks...?</TD></TR></TABLE>
Havent run at the track yet hoping for 111+ mph, E/T's will come with traction
what are you running at the tracks...?</TD></TR></TABLE>
Havent run at the track yet hoping for 111+ mph, E/T's will come with traction
