i just got a custom 2.5 " exhaust on my DOHC ZC CRX and the guy that did it cut the flange off of my exhaust manifold(i don't really mind because i got a deal on the exhaust and i'm changing to a header very soon), but when i do switch to a header i want to be able to bolt right up to it and not have to have it cut like my manifold is... anyway, where can i get a flange that i can put on my midpipe now and will be able to just bolt to my header?

 

You may want to try a muffler shop out. A lot of times they have good parts there, at least the one by my house did.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX_1.8T &raquo;</TD></TR><TR><TD CLASS="quote">You may want to try a muffler shop out. A lot of times they have good parts there, at least the one by my house did.</TD></TR></TABLE>

for sure call some local muffler shops and see if they can add one on for you... shouldn't cost too much.

 

we got your basic flanges and gaskets

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by manson &raquo;</TD></TR><TR><TD CLASS="quote">

for sure call some local muffler shops and see if they can add one on for you... shouldn't cost too much.</TD></TR></TABLE>

Thats what I do and I saved a lot of money, guy charged me 50 cents per gasket. Best price I have seen.

 

would that 2.5" 2 bolt flange bolt up to any stock header? in other words, would it cause any problems with a stock manifold or headers for a stock car?