Know where I can get some Motor Mounts. It's for my D Series. Mine are going bad...? Also if you can tell me how much the Run for?

 

about 180 for all 4 new from hondaautomotiveparts.com

or get mugen's for 30 bucks more from king-motorsports.com

 

Energy Suspension Inserts

I love 'em

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96-EJ6 B18C &raquo;</TD></TR><TR><TD CLASS="quote">Energy Suspension Inserts

I love 'em</TD></TR></TABLE>

me too

 

My crx motor mounts cost my $10.. Go to home-depot and get some 100% polyeurthane sealant and fill up the mounts and let them dry for about a week.. After that sand on them a little and put them back in..

I have also heard that 3M window-weld works great for this also and can get gotten at any parts store..

 

i got inserts from jegs and polyeurthane them in they work great.

also try a u pull it yard

 

Thanx Alot.. =] Those are some Niffty Ideas lol..

 

I would also get energy inserts there great

 

man im the only one who hates my inserts...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator &raquo;</TD></TR><TR><TD CLASS="quote">man im the only one who hates my inserts... </TD></TR></TABLE>

I thought you got the mugen ones?

 

no, i bought new honda front and rear mounts and put in the inserts, and my car feels like its going to rattle apart...

 

yeah how do you think i feel i have t606 billet aluminum Hasport mounts. i wouldnt trade em for anything else but every vibration from the engine is felt.

 

just get new inserts

 

they were brand new, they are only about 2-3 weeks old...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator &raquo;</TD></TR><TR><TD CLASS="quote">no, i bought new honda front and rear mounts and put in the inserts, and my car feels like its going to rattle apart... </TD></TR></TABLE>

me too but the decrease in wheel hop is worth it
theyre only like 20 dollars


Modified by 91civicLX at 8:56 PM 1/26/2005

 

lol okay so i should definately go with the Inserts? Cause i know someone that works at honda, and he could hook me up with some mounts but i wanted to see if there was another route. THe Inserts is to basically fill in the open area where the mounts are?

 

I have a set of the motor mount inserts, how did you guys go about installing the rear one? Did you remove the intake mani and go from the top?

 

swivle end and long extenion

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator &raquo;</TD></TR><TR><TD CLASS="quote">

or get mugen's for 30 bucks more from king-motorsports.com</TD></TR></TABLE>


Do the Mug's fit D-series?

 

yup, they are for d-series...