Stock timing on B16?
Thread Starter
Junior Member
Joined: May 2004
Posts: 847
Likes: 0
From: Alameda, CA, USA
Re: Stock timing on B16? (eda6)
thanks, is there a mark on the CTR pulley? and when changing out the dizzy are there any other parts that need to be changed too? like any gaskets?
Honda-Tech Member
Joined: Apr 2004
Posts: 2,785
Likes: 1
From: phoenix, az
Re: Stock timing on B16? (2.2XDreams)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2.2XDreams »</TD></TR><TR><TD CLASS="quote">thanks, is there a mark on the CTR pulley? and when changing out the dizzy are there any other parts that need to be changed too? like any gaskets?</TD></TR></TABLE>
16 btdc is the red mark on the ctr pulley. There is one o-ring on the dizzy. It's located on the shaft. Just remove the dizzy and install replacement simple as that. Your new dizzy should have a new o-ring.
16 btdc is the red mark on the ctr pulley. There is one o-ring on the dizzy. It's located on the shaft. Just remove the dizzy and install replacement simple as that. Your new dizzy should have a new o-ring.
Thread
Thread Starter
Forum
Replies
Last Post
ilovejdm
Honda Civic / Del Sol (1992 - 2000)
5
Oct 31, 2006 03:15 PM
DaCRXboi
Honda CRX / EF Civic (1988 - 1991)
21
Apr 22, 2006 03:58 AM
