i have a b16 w/ 9:1 pistons, and eagle rods. Wanna run 330 injectors, fuel pump, fmu , but i wanna do about 12-14 psi. i dont wanna run a stand alone. is that ok should i have bigger injectors?? etc..what would be good for that setup thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jhmaccp3 &raquo;</TD></TR><TR><TD CLASS="quote">i have a b16 w/ 9:1 pistons, and eagle rods. Wanna run 330 injectors, fuel pump, fmu , but i wanna do about 12-14 psi. i dont wanna run a stand alone. is that ok should i have bigger injectors?? etc..what would be good for that setup thanks</TD></TR></TABLE>

If you want your car to break, don't ditch the FMU.

Get some proper engine management or else your car won't last long. NO MATTER what size injectors you have.

 

i would say grab some 550 or maybe a little higher, and then pick your posion: neptune, hondata, uberedata ect...

 

I say run at least some 450's.

Ditch that fmu.