Will a D15 downpipe fit on a B16 motor?

 

I would think not, just find a b16 header. I would of gave you my stock one for free but I tossed it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondasniper &raquo;</TD></TR><TR><TD CLASS="quote">Will a D15 downpipe fit on a B16 motor?</TD></TR></TABLE>

No you will need a b series manifold and downpipe.

 

Oh that sux. thanks anywayz!!! I need a downpipe for any b series then. If anybody has one, please pm me!! Thanks!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondasniper &raquo;</TD></TR><TR><TD CLASS="quote">Oh that sux. thanks anywayz!!! I need a downpipe for any b series then. If anybody has one, please pm me!! Thanks! </TD></TR></TABLE>

I don't think you want one from "any" B-series. Oh and if you need one, post it in the classifieds.

 

the JDM B16, (1st Gen) secondaries are smaller than say the ones foud on the USDM B16...HTH

 

pm'd

 

Kiwi...pmed ya

EF SiR.. Thanks for da info!!!

EL Vap133... I will take any downpipe for now, im planning to get a whole custom mandrel bent pipe made for my car at the local exhaust shop. I have 2 O2 Sensor bungs that are going to get welded in if I need to replace the manifold with a different one (e.g. like a gsr or ls manifold) And a plug for the bungs i won't use. I just want to get my car on the road.

Thanks everyone for your help!!!

 

EL Vap133...I c what ur talking about. I saw a 90 Integra LS Downpipe and it is only a 1 instead of a 2-1. I would like to get a 2-1 pipe to make things easier. Thanks for da info!!!