Hi all, I have akenwood 800w 2ch amp and i've had it for alittle over a year. What the problem is, is that whenever I put new fuses in the slots, then turn the car on, BOTH fuses blow. I've gone through about 5 sets of fuses and I just don't know what to do or whats wrong. Someone please help me out and tell me whats wrong or what I can do to fix it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twobit &raquo;</TD></TR><TR><TD CLASS="quote">Hi all, I have akenwood 800w 2ch amp and i've had it for alittle over a year. What the problem is, is that whenever I put new fuses in the slots, then turn the car on, BOTH fuses blow. I've gone through about 5 sets of fuses and I just don't know what to do or whats wrong. Someone please help me out and tell me whats wrong or what I can do to fix it.</TD></TR></TABLE> The amp has blown outputs, try this first , disconnect the speakers from the amp, install new fuses, turn it on, if the fuses blow, the amp is hooped, remove it and have it fixed or replace it, if they don't blow, [you would be very lucky] you have blown speakers or shorted out speaker wires, whatever you do, before you hook up another amp, or the repaired one, check the speaker wires and the speakers 94