i'm so excited to get them on once the weather clears up. the craftsmanship on these coilovers look superb. btw i got the street set up (10k/ 8k) since my car is daily driven. one question i have is, how hard is it to loosen the top nut to preload the spring? i was wondering whether i had to use a spring compressor or not? but anyway, here are the pics..




btw i ordered the rear LCAs and i may be selling them, so i was wondering if any of you guys would be interested?

 

hey, can you take a pic of the top shock mount? im just curious. thanks.

 

To answer one of the question's, DEFFINITLY use a spring compressor, or else when you take it off, it will go like a rocket.

 

no need to use a spring compressor. follow the directions on the instructions.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93civicEX &raquo;</TD></TR><TR><TD CLASS="quote">To answer one of the question's, DEFFINITLY use a spring compressor, or else when you take it off, it will go like a rocket. </TD></TR></TABLE>

you don't disassemble the old units. you just remove and replace.

 

thanks for the comments guys.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tyson &raquo;</TD></TR><TR><TD CLASS="quote">hey, can you take a pic of the top shock mount? im just curious. thanks.</TD></TR></TABLE>

here u go

 

loosen that top 19mm bolt till its flush with the top of the shaft. raise the higher perch as high as you can. Use the lower perch to adjust ride height. put car on the ground and tighten the 19mm bolt as tight as you can. Done.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b cruz &raquo;</TD></TR><TR><TD CLASS="quote">no need to use a spring compressor. follow the directions on the instructions.

you don't disassemble the old units. you just remove and replace.</TD></TR></TABLE>


Ohh, I understand now, Thanks for clearing me up

 

and knowing is half the battle

 

I've had the same ones on my EJ for a couple months and I love them. Dollar for Dollar best suspension on the market!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sleeper_teg &raquo;</TD></TR><TR><TD CLASS="quote">btw i ordered the rear LCAs and i may be selling them, so i was wondering if any of you guys would be interested?</TD></TR></TABLE>

Im assuming for a DC2, and how much would you want for them?

I got my OmniPower coilovers a few months ago. Love these things. I know you will too.

 

How long did it take to ship from the time of purchase?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fabworxs &raquo;</TD></TR><TR><TD CLASS="quote">Dollar for Dollar best suspension on the market! </TD></TR></TABLE>

What makes you say that?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g0rg0n &raquo;</TD></TR><TR><TD CLASS="quote">How long did it take to ship from the time of purchase?</TD></TR></TABLE>

when available and instock.. no longer then 5 days tops. depending on locations.

 

Thanks!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ECKSbloodECKS &raquo;</TD></TR><TR><TD CLASS="quote">Im assuming for a DC2, and how much would you want for them?

I got my OmniPower coilovers a few months ago. Love these things. I know you will too.</TD></TR></TABLE>

hey pm me with your zip code so i can see how much shipping would be. and thanks kteller for the great customer service. only thing bad was how ups rescheduled my shipment but that wasn't kteller's fault. i absolutely vouch for him

and of course thanks to omnipower for the great products!

 

you can take it off w/o spring compressor just put a towel over it and aim away from head! But you can rent one at autozone for like $10

 

just ordered some of those too, waiting for my payment to get to kteller

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twizzle &raquo;</TD></TR><TR><TD CLASS="quote">you can take it off w/o spring compressor just put a towel over it and aim away from head! But you can rent one at autozone for like $10
</TD></TR></TABLE>

are you sure it's ten bucks?? When i rented one, I had to pay full price which was like 45 bucks and then you get your money back when you return the compressor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aeon &raquo;</TD></TR><TR><TD CLASS="quote">

are you sure it's ten bucks?? When i rented one, I had to pay full price which was like 45 bucks and then you get your money back when you return the compressor. </TD></TR></TABLE>

why do you need a compressor? these are just unbolt stock/whatever in the car, then put in the new ones.. no need to take anything part?

 

i doubt the spring on the omnipower suspension is even compressed. so it won't shoot out all crazy if you unbolt them to take the top hat off.

 

Hey mr. kteller, it seems like the people yapping on this thread about a spring compressor has never seen, touched or owned any shock body adjustable set up.

:rollseyes:

To anybody looking for a set of these, get them from Kteller. Smoothest transactions ever

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bluehatchy &raquo;</TD></TR><TR><TD CLASS="quote">i doubt the spring on the omnipower suspension is even compressed. so it won't shoot out all crazy if you unbolt them to take the top hat off.
</TD></TR></TABLE>

these is no need to remove the top 19mm bolt. just loosen it untill it is flush with the top of the shaft

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 &raquo;</TD></TR><TR><TD CLASS="quote">

why do you need a compressor? these are just unbolt stock/whatever in the car, then put in the new ones.. no need to take anything part?</TD></TR></TABLE>

oh no, i wasn't saying that I used the spring compressor for the omni coilovers. I was just stating that when i rented it from autozone it was more then 10 bucks.

 

kteller is the place to get them
great transaction and shipping price is excellent!! cost me 6bux to ship the coilovers, lca's and camber kit. it weighed 60lbs. they deserve a plus from me for that!
def. a sweet deal

 

Are they in stock now? Can't wait to get them in....