I have read some bad experiences with Exploited racing. Well, I just wanted to let everyone know that I had a great experience with Brian(Exploited Racing). I like giving credit where credit is due, cause no one is perfect and Brian has made an honest effort on improving his image. Whoever had a bad experience with guy, I am quite sure he has taken care of it. I just hate hearing about businesses being bashed-that's all.
Exploited racing gets a

Will

 

what did you get done there?

 

bought a flange.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">bought a flange. </TD></TR></TABLE>

w00t

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DefiantGSR &raquo;</TD></TR><TR><TD CLASS="quote">

w00t</TD></TR></TABLE>

LOL!!

Its a start I guess..

I was planning to buy from him also, not till things are in better shape, for other members. Then ill consider it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by synik &raquo;</TD></TR><TR><TD CLASS="quote">

LOL!!

Its a start I guess..

I was planning to buy from him also, not till things are in better shape, for other members. Then ill consider it. </TD></TR></TABLE>

So, if you wait until other members buy to decide if you sould buy or not, dont you think others aren't thinking the same as you? Everyone is going to be waiting for each other to buy.

 

just keep it business everyone.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crucian &raquo;</TD></TR><TR><TD CLASS="quote">

So, if you wait until other members buy to decide if you sould buy or not, dont you think others aren't thinking the same as you? Everyone is going to be waiting for each other to buy. </TD></TR></TABLE>

sToopid...

There are lots of members who order from him, who had BAD experienced with his service. I am waiting till he get all these bad orders resolved, then maybe I will consider him afterwards. DOHHH! Smart @ss..

 

i STILL haven't recieved flanges that fit perfect, posts like this **** me off, what if you were on teh end getting fucked? would you make this post? he has had my money for almost 2 months

 

I got $300 worth of flanges from him. They will be here today. Then I can let you guys how everything went. 98ctr

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mpir3 &raquo;</TD></TR><TR><TD CLASS="quote">i STILL haven't recieved flanges that fit perfect, posts like this **** me off, what if you were on teh end getting fucked? would you make this post? he has had my money for almost 2 months </TD></TR></TABLE>

Let me tell you this. I have been screwed over in the past numerous times by a few people in this industry, let alone in my entire life outside of racing.
Here are a few examples:
4 years ago paid a fabricator (will not disclose who-no it's not Full Race) $1,500 cash up front to get my turbo manifold made and waited more than six months. Had to get my money back. Minus 50 bucks.
Had a turbo manifold made by another shop-this thing wouldn't even mount up to the head.
Had my 10pt cage done by a shop and ended up paying double the cost cause they could't finish it. (this one almost got me divorced)
I could go on and on with my trials and tribulations with my racecar. But I hope you get the idea.

Now, with that said how did I improve my life? I got smarter! Whatever problem you have with him you handle it one on one.
Would I have posted something bad about one's business because a product is not "perfect", the answer is NO! Remember, nothing is perfect in this industry and handle it with(in this case Brian) to resolve your fitment problems behind forum doors. Otherwise, get your money back and go else where!

Bad news spreads faster than good news and that is why I posted this topic.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mpir3 &raquo;</TD></TR><TR><TD CLASS="quote">i posts like this **** me off </TD></TR></TABLE>
amen

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">

Would I have posted something bad about one's business because a product is not "perfect", the answer is NO! Remember, nothing is perfect in this industry and handle it with(in this case Brian) to resolve your fitment problems behind forum doors. Otherwise, get your money back and go else where!
</TD></TR></TABLE>

You can't just "get your money back", I tried very hard for weeks.

 

try harder.

 

That isnt good customer service making the customer wait and dont want to refund when the product is bad or defective.

 

damn the ******* reposts dude, ******* go to general discussion. You should talk with your bud at exploited first and make SURE he has taken care of everyone before you go on here saying you give him a , because you know everyone is gonna get on your **** unless they have been compensated.

 

Hey, I didn't expect this to go on for this long. And,yes, this should be handled in GDD if this is the case. And I am giving him a with our business transaction only. And he is not my "bud". Strictly business.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snoochtodanooch &raquo;</TD></TR><TR><TD CLASS="quote">damn the ******* reposts dude, ******* go to general discussion. You should talk with your bud at exploited first and make SURE he has taken care of everyone before you go on here saying you give him a , because you know everyone is gonna get on your **** unless they have been compensated. </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">Hey, I didn't expect this to go on for this long. And,yes, this should be handled in GDD if this is the case. And I am giving him a with our business transaction only. And he is not my "bud". Strictly business.
</TD></TR></TABLE>
well regardless, you aren't helping him by doing this ****. Let him take care of all of his problems, then post, that way people aren't constantly reminded about how he has screwed up in the past. I want the dude to be able to make a living just as much as the next guy, you aren't helping him.

 

ok

 

posted this in the welding forum as well?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">

Let me tell you this. I have been screwed over in the past numerous times by a few people in this industry, let alone in my entire life outside of racing.
Here are a few examples:
4 years ago paid a fabricator (will not disclose who-no it's not Full Race) $1,500 cash up front to get my turbo manifold made and waited more than six months. Had to get my money back. Minus 50 bucks.
Had a turbo manifold made by another shop-this thing wouldn't even mount up to the head.
Had my 10pt cage done by a shop and ended up paying double the cost cause they could't finish it. (this one almost got me divorced)
I could go on and on with my trials and tribulations with my racecar. But I hope you get the idea.

Now, with that said how did I improve my life? I got smarter! Whatever problem you have with him you handle it one on one.
Would I have posted something bad about one's business because a product is not "perfect", the answer is NO! Remember, nothing is perfect in this industry and handle it with(in this case Brian) to resolve your fitment problems behind forum doors. Otherwise, get your money back and go else where!

Bad news spreads faster than good news and that is why I posted this topic. </TD></TR></TABLE>

I work in the automotive industry and run the wholesale division of parts dept that does more business in one month than he likely does in one year. Problems do occur, I treat the customer with respect as if they were right and make sure 110% the problem is fixed ASAP.

Im sorry but after him telling me the flanges fit the first time and that i had the wrong head, then admiting his mistake, making me new ones (which i was greatfull for, it was the right thing to do) yet still ships them before he can verify they actually fit 100% (which they didn't).

I guess i just expect too much since im used to the service i provide...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">try harder.</TD></TR></TABLE>

I would love to hear your suggestions. I have posted all of our e-mails in another thread with the same name as this one in the fab forum. Read it and tell me what I should have done to get better results.

 

Exploited Racing gets from me. I got my flanges today and they fit just fine. The quality of the flanges are too. 98ctr