My buddy is interested in selling his 1988-91 DTM Body flare molds
pictures can be seen on this page:

http://www.gt-racecar.com/gallery.asp?offset=36

It is a Road Race kit but would fit on a street car with a little mods.

He is selling the molds for $3000 plus shipping or you can buy a pull for $3000 plus shipping

let me know if you are interested

cdoodson@telus.net

 

That looks like Mission Raceway near Vancouver...

 

YES IT IS!

 

Are there an shots other than the primarily front ones?

There are some guys looking for flares for SCCA Production class CRXs but that hood that incorporates the fender tops is not allowed. The doors if normal shape would be OK and maybe the rear flares and hatch would work but the hood and front fenders need to be seperate parts as they were from stock.

 

that's a crazy lookin' crx

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hunter &raquo;</TD></TR><TR><TD CLASS="quote">that's a crazy lookin' crx</TD></TR></TABLE>

It gets better. You should see it without it skin.

 

Bump,
This car is for sale aswell!
Way too much money put into this car and has some really great parts on it.
The owner has had some blood presure problems and does not wish too race anymore
The car is set up with a 1.8l LS V-Tec swap, custom suspension, partial tube frame,
Flared body,

Car is owned by one guy and the molds by another

E-mail me if interested
cdoodson@telus.net

 

links to more pics:
https://honda-tech.com/zerothread?id=1077446
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX Lee &raquo;</TD></TR><TR><TD CLASS="quote">Are there an shots other than the primarily front ones?

There are some guys looking for flares for SCCA Production class CRXs but that hood that incorporates the fender tops is not allowed. The doors if normal shape would be OK and maybe the rear flares and hatch would work but the hood and front fenders need to be seperate parts as they were from stock.</TD></TR></TABLE>

The beauty of these type of molds is that you can pull any or part of the greater piece. In other words if all a person needs is the flares, then pull just the flares. All the pieces, hood, fenders, bumpers CAN be separated.

 

J's Racing Japan sells fender flares for the CRX..

 

hrmness.....

 

i ike ti but then againi grew up liking wide bodies. or was that phat asses

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by navin &raquo;</TD></TR><TR><TD CLASS="quote">J's Racing Japan sells fender flares for the CRX..</TD></TR></TABLE>

Not like these. These are modeled after the "DTM" and new "Trans Am" look. There was no one out there with an up to date body syle.

 

Does anyone have a picture of the J's racing flares?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doodson &raquo;</TD></TR><TR><TD CLASS="quote">Does anyone have a picture of the J's racing flares?</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teamols &raquo;</TD></TR><TR><TD CLASS="quote">i ike ti but then againi grew up liking wide bodies. or was that phat asses</TD></TR></TABLE>

hey, leave me out of this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jisu009 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

These taper back to the body as they go down like most street type flares.

 

BUMP

and does j's have a website with there products

 

I'll forward this thread to the guy whom I know was looking for some molds although he may already know of them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doodson &raquo;</TD></TR><TR><TD CLASS="quote">BUMP

and does j's have a website with there products</TD></TR></TABLE>

http://www.jsracing.co.jp/

 

BUMP

 

(insert .RJ)

"no bumping"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prkiller &raquo;</TD></TR><TR><TD CLASS="quote">(insert .RJ)

"no bumping"</TD></TR></TABLE>

<FONT SIZE="9">BUMP</FONT>

 

hey for some reason pics wouldn't load could you e-mail them to me..? also possibly interested in the j's racing flares but link listed doesn't help me find them..it's their site but no us distributors show them on their sites? any help would be appreciated.. i am looking for the wide one piece front end look but my class doesn't allow one piece front ends...thanx again

 

The good thing about these flares are that you can just take a pull of 'just the fender flares' from the mold

 

I pm'd daigo a couple weeks ago about getting some flare pulls off these molds, but he never replied. I'm in Vancouver, and in need of some flares for my 89 hatchback.