Toda Header and Spec C Cams, ITR IM, EBC Pads, S4C differential, Steering Lock Assembly+ 56k sure
*updated 2/1 with NEW PRICES*
Click the thumbnails!
All items well taken care of and in good condition as shown.
Feel free to e-mail me with any questions - hpfsi@comcast.net - or post them up here!
Honda Civic Si Stock Differential (S4C)
Removed from my ’99 Si with only 10k miles. Never raced with/launched on, great condition; includes both differential bearings (one has a small ding in the side, can be seen in pic). $35

New Honda Steering Lock Assembly w/Keys
My car was stolen a few years back and I received a replacement steering lock assembly through my insurance company when the original piece only needed to be reassembled. So I have an extra one, new in box, keys included as shown in picture. Part # is 35100-S01-A01 (which may fit any number of newer manual hondas). Selling for $40.

Toyota 440cc Low-Impedence Injectors
I bought these injectors new from the Toyota dealer for a chunk of change and put 20k on them. Selling because I bought bigger injectors. Toyota part #23250-42010, selling for $150 shipped.

New Goodyear OEM Replacement B16a Timing Belt
This timing belt was bought as a backup for my last motor which I never ended up using. Brand new in box, selling for $30

New ContiTech OEM Replacement B18A/B Timing Belt
This is a new german-made belt (looks to be great quality). Never installed because I ended up going ls/vtec. Selling for $30

New ATP Turbo Machined Steel 2.5"-3" Transition
Product details can be seen here. Selling for $15 shipped.

Stock B16a2 Cam Gears
From my '99 Si, $10.

Various Stock and Aftermarket B-series Vtec Valvetrain Items
1 - Stock B16a2 exhaust valvesprings, retainers, and seats - make offer!
2 - Stock B16a2 intake dual valvesprings and retainers, no seats - make offer!
3 - Toda Racing intake only dual valvesprings, great condition - make offer!
4 - Portflow Ti retainers, full set, used but no galling from valvesprings - make offer!
5 - Brand New OEM Honda exhaust valve guides, set of (8) - $35
6 - ITR intake and exhaust valves, still a good amount of Swain Tech. ceramic coating on valve faces - make offer!

Stock B16a2 Cams
From my '99 Si, great condition! $60

Honda ITR Intake Manifold Sold to Accord SiRT!
Toda Racing Spec C B-Series Cams Also sold to Accord SiRT!
Toda Racing B-Series Road Race Header - Sold! Thanks HybridCRX88!
EBC Green Stuff Brake Pads - Sold!
Toda Racing 81.5mm B-Series High-Comp. Pistons (full set) - Sold
New Unopened B18a/b OEM Honda Headgasket - Sold
Additional items may be added as I finish my project. Thanks for looking
Modified by hpfsi at 10:14 AM 2/11/2005
Modified by hpfsi at 8:46 PM 2/15/2005
Click the thumbnails!
All items well taken care of and in good condition as shown.
Feel free to e-mail me with any questions - hpfsi@comcast.net - or post them up here!
Honda Civic Si Stock Differential (S4C)
Removed from my ’99 Si with only 10k miles. Never raced with/launched on, great condition; includes both differential bearings (one has a small ding in the side, can be seen in pic). $35
New Honda Steering Lock Assembly w/Keys
My car was stolen a few years back and I received a replacement steering lock assembly through my insurance company when the original piece only needed to be reassembled. So I have an extra one, new in box, keys included as shown in picture. Part # is 35100-S01-A01 (which may fit any number of newer manual hondas). Selling for $40.
Toyota 440cc Low-Impedence Injectors
I bought these injectors new from the Toyota dealer for a chunk of change and put 20k on them. Selling because I bought bigger injectors. Toyota part #23250-42010, selling for $150 shipped.
New Goodyear OEM Replacement B16a Timing Belt
This timing belt was bought as a backup for my last motor which I never ended up using. Brand new in box, selling for $30
New ContiTech OEM Replacement B18A/B Timing Belt
This is a new german-made belt (looks to be great quality). Never installed because I ended up going ls/vtec. Selling for $30
New ATP Turbo Machined Steel 2.5"-3" Transition
Product details can be seen here. Selling for $15 shipped.
Stock B16a2 Cam Gears
From my '99 Si, $10.
Various Stock and Aftermarket B-series Vtec Valvetrain Items
1 - Stock B16a2 exhaust valvesprings, retainers, and seats - make offer!
2 - Stock B16a2 intake dual valvesprings and retainers, no seats - make offer!
3 - Toda Racing intake only dual valvesprings, great condition - make offer!
4 - Portflow Ti retainers, full set, used but no galling from valvesprings - make offer!
5 - Brand New OEM Honda exhaust valve guides, set of (8) - $35
6 - ITR intake and exhaust valves, still a good amount of Swain Tech. ceramic coating on valve faces - make offer!
Stock B16a2 Cams
From my '99 Si, great condition! $60
Honda ITR Intake Manifold Sold to Accord SiRT!
Toda Racing Spec C B-Series Cams Also sold to Accord SiRT!
Toda Racing B-Series Road Race Header - Sold! Thanks HybridCRX88!
EBC Green Stuff Brake Pads - Sold!
Toda Racing 81.5mm B-Series High-Comp. Pistons (full set) - Sold
New Unopened B18a/b OEM Honda Headgasket - Sold
Additional items may be added as I finish my project. Thanks for looking
Modified by hpfsi at 10:14 AM 2/11/2005
Modified by hpfsi at 8:46 PM 2/15/2005
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vecspeed12 »</TD></TR><TR><TD CLASS="quote">everything looks GOLD!!! </TD></TR></TABLE>
Good as gold
Good as gold
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkRiBLaH »</TD></TR><TR><TD CLASS="quote">willing to trade that toda header for the hytech copy (weapon r race) ?</TD></TR></TABLE>
Sorry (on a side note I would trade any item +/- cash for full-race/l-con traction bars) but I'm done with the NA setups for the time being. Thanks for the offer though
Sorry (on a side note I would trade any item +/- cash for full-race/l-con traction bars) but I'm done with the NA setups for the time being. Thanks for the offer though
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vecspeed12 »</TD></TR><TR><TD CLASS="quote">everything looks GOLD!!! </TD></TR></TABLE>
me too why???
me too why???
thanks for the bumps.... pm's replied to
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid92b20 »</TD></TR><TR><TD CLASS="quote">
me too why???</TD></TR></TABLE>
lol honestly just a lot of light in one room - halogen, incandescent, and fluorescent - the camera couldn't quite compensate correctly for each tone and I didn't want to use a flash for the pictures (mainly just the header pics).
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid92b20 »</TD></TR><TR><TD CLASS="quote">
me too why???</TD></TR></TABLE>
lol honestly just a lot of light in one room - halogen, incandescent, and fluorescent - the camera couldn't quite compensate correctly for each tone and I didn't want to use a flash for the pictures (mainly just the header pics).
ITR intake manifold sold to Accord SiRT - thanks Carlos!
bump... please help me find a new home for the Toda parts!
bump... please help me find a new home for the Toda parts!
Morning bump!
Lets make some deals people! More items to be added shortly (misc timing belts, valvetrain items, injectors, cams etc). Check back soon for updates...
Lets make some deals people! More items to be added shortly (misc timing belts, valvetrain items, injectors, cams etc). Check back soon for updates...
NEW PRICES and NEW PARTS and NEW PICS ADDED! buuuuuump! pm's replied to - if you didn't hear back from me please pm/email me again - I have been trying to keep good track of all my conversations but you know how it goes sometimes...
Modified by hpfsi at 1:15 AM 1/11/2005
Modified by hpfsi at 1:15 AM 1/11/2005
Pm's replied to! Header sold to HybridCRX88! Brake pads sold too! Thanks everybody!
SneezR - I worked my way from a very fine flap wheel through various 3M scotch-brite type abrasives to some mother's metal polish all on my angle grinder/buffer. Potentially time consuming but worth the effort on parts that deserve it.
SneezR - I worked my way from a very fine flap wheel through various 3M scotch-brite type abrasives to some mother's metal polish all on my angle grinder/buffer. Potentially time consuming but worth the effort on parts that deserve it.


